Problem with "C" procedure on W850i

**Dylan144GT** · 05-29-2010

Hi all

First post here and a bit of a noob when it comes to this stuff. Very new to it. Seems like you guys have a really good thing going here, informative and helpful! So I'm amped to join.

I have a W850i which I am trying to get going again. Classic symptoms of the White Screen of Death and only the vibratory response when ever you push the power button. Only way to switch it off is to remove the battery.

I've read the tutorial on XS++ and loaded the SEMC USB drivers (with much difficulty). Problem is nothing happens when I press and hold the c button after connecting the USB cable. XS++ times out and nothing happens.

I have had the phone apart and did note the the slider flex ribbon was worn and have ordered a replacement. Could this be the problem? Almost as though the communication is not getting through because of the flex ribbon?

Any help would be much appreciated.

Thanks

Dylan

**Dylan144GT** · 05-29-2010

**Lestari** · 05-29-2010

I have the same W850i. I use SEtool2lt to flash the main, fs, and custom files. Seems to have flashed sucessfully but it is blinking red light and white screen when I on the phone. Any idea to get it working again?

**Dylan144GT** · 05-29-2010

I haven't gotten there yet so I couldn't help you. As I said above, I am very new to this all and still don't even know all the jargon. So I think you are a few steps ahead of me my friend! :D

Dylan

**hyperion17** · 05-30-2010

Originally Posted by Dylan144GT

OK, went and tried again as all my atempt were last night. It worked now, don't ask me why, but it did. I got the following log for XS++:
I guess the question is, what firmware do I need now? Can you explain what you look for so that I know in the future.
Thanks again.
Dylan

Use these files:
W850_R1KG001_MAIN_GENERIC_CY_RED52
W850_R1KG001_FS_EUROPE_2_RED52 and as a a custom file
HB1-06_Gen_CDA102568_11_R5A_GENERIC_EUROPE_2

@lestari, post an identify log (without IMEI).

**Lestari** · 05-30-2010

Dear Hyperion,

I do not wish for an Europe file but a Indonesian (id) language file.
I llash using SEtool2lt with these files:
W850_R1ed001_main_generic_cy_red49.mbn,
W850_R1ED001_FS_APAC_RED.fbn and
W850_CDA102677_98_R1A_GENERIC_Trade_ID_Indonesia
which are downloaded from this Topsony site

Attached is the log. Thanks.
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102677/98
MODEL:W850i
VARIANT:APAC
LANGUAGE: EN
LANGUAGE: MS
LANGUAGE: ID
LANGUAGE: TL
LANGUAGE: VI
LANGUAGE: ZS

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxx0038 CERT:RED
FLASH CID:49 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Acer\Desktop\DownloadsW850\W850_R1ED001_M AIN_GENERIC_CY_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:9100
Will flash 455 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Acer\Desktop\DownloadsW850\W850_R1ED001_F S_APAC_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:5060
Will flash 253 blocks...
SSW loading returns:0
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
Directory: tpa/preset/custom/
CONTENT_DOWNLOAD_HOOK.itm (10240)
Customize.xml (2855)
FM_PICTURES_HOOK_3.itm (10240)
FM_SOUNDS_HOOK_3.itm (10240)
FM_THEMES_HOOK_3.itm (10240)
FM_VIDEOS_HOOK_3.itm (10240)
GAMES_HOOK_3.itm (10240)
MEDIA_PLAYER_HOOK_3.itm (10240)
ORG_APPLICATIONS_HOOK_3.itm (10240)
Picture_Generic Trade ID_4522.1.jpg (28784)
preloaded_config.xml (100174)
SETT_RINGTONE_HOOK_1.itm (10240)
SETT_SCREENSAVER_HOOK_1.itm (10240)
SETT_STARTSHOW_HOOK_1.itm (10240)
SETT_WALLPAPER_HOOK_1.itm (10240)
Sound_Generic Trade ID_4523.1.mp3 (125388)
VIDEO_PLAYER_HOOK_1.itm (10240)
Phone detached
Elapsed:436 secs.

**Dylan144GT** · 05-30-2010

Hi Hyperion17

Thanks for the reply, much appreciated. :)

I have a new problem now, I was busy flashing the phone and the battery ran out so it lost connection half way through. I tried to restore the backed up GDFS which it accepted but now it only connects when holding down the 2-5 buttons and then it seems to disconnect half way through the reading of the system information.

Can anyone shed somelight on this please? Has my beloved W850i gone to cellphone heaven?

Dylan

**hyperion17** · 05-30-2010

Originally Posted by Dylan144GT

Hi Hyperion17

Thanks for the reply, much appreciated. :)

I have a new problem now, I was busy flashing the phone and the battery ran out so it lost connection half way through. I tried to restore the backed up GDFS which it accepted but now it only connects when holding down the 2-5 buttons and then it seems to disconnect half way through the reading of the system information.

Can anyone shed somelight on this please? Has my beloved W850i gone to cellphone heaven?
Dylan

We can't possibly know until you post an identify log from Setool.

@lestari, those files were for Dylan and "identify log" does not mean "flashing log".

**Lestari** · 05-31-2010

**Lestari** · 05-31-2010

Hi Dylan. Sorry for 'hijacking' your post. I thought you have resolved your problem. But we sure do have a common problem and hope you dont mind sharing.

Thanks hyperion17. I think I am in a different time zone and am slow to response. Here is the identity log and also the 're-flash' that I did today. Symtoms still the same-blinking red light and blinking white screen. it is weird. My phone is W850i but the identity say model K700. i note that there are many with this wrong identity in the forum.

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35282601310038 CERT:RED
FLASH CID:49 COLOR:RED

Model:K700
MAPP CXC article: R1ED001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1ED001
Language Package:APAC
CDA article: CDA102677/92
CDA version: R4A
Default article: cxc1250489
Default version: R1EJ001

Operator: 000-00

Elapsed:7 secs.

Thread: Problem with "C" procedure on W850i

Thread Tools

Display

Hybrid View

Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

The Following User Says Thank You to Dylan144GT For This Useful Post:

Re: Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

Re: Problem with "C" procedure on W850i

Thread Information

Users Browsing this Thread

Tags for this Thread

Posting Permissions