K800i after flashing "another application is running, close it and re start camera"

[bench04]

K800i CID51 white screen then logo, after i flash with the same flash file using SETOOL the phone is ok., but the camera is not working...is there anything wrong or how can i fix the camera problem.. before it became white screen the camera is working..,.

tnx....

[tanjot]

Change camera drivers.... Download them and copy them to IFS/SETTING/CAMERA

[bench04]

where do i locate IFS/SETTING/CAMERA i alredy download the camera driver...im using SETOOL..tnx

[tanjot]

Yes in that directory.... Just copy it there the old driver will be automatically get replaced

[bench04]

same problem ser.. i use sx++ but still no luck.............

[riders4sia]

K800i CID51 white screen then logo, after i flash with the same flash file using SETOOL the phone is ok., but the camera is not working...is there anything wrong or how can i fix the camera problem.. before it became white screen the camera is working..,.

tnx....

update CID to 52 and full flash with CID52 firmware and post result.

[bench04]

update CID to 52 and full flash with CID52 firmware and post result.

i already update to CID52 ser, still no luck...............

[taraa]

i already update to CID52 ser, still no luck...............

near camera connector 8leg cristal ic jumper it

[satch1234]

near camera connector 8leg cristal ic jumper it

Dear taraa,when you post solution please post with full details as users don't know how to make jumper and what pins to connect.
Remove IC,there are 8 pins and must be connected like this:
1 2 3-4
5-6 7 8
I already tested it and camera is working fine but it is impossible job for novice and hardly that you can even see contacts without microscope.
Regards,
Satch

[Rich67]

i had the very same problem, google sony ericsson easter eggs, follow sequence go to settings and choose camera after doing so it will work again, at least it worked for me, good luck