Problem with "C" procedure on W850i

[Dylan144GT]

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101882292 CERT:N/A
FLASH CID:52 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35240101872701

Model:W850i
Brand:Generic
MAPP CXC article: R1ED001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1ED001
Language Package:EUROPE_1
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250489
Default version: R1ED001

Operator: 000-00

Elapsed:6 secs.


Sorry about the long silence guys. Here is the log. I finally got SETool to work and its spat this out. I see I have an IMEI mismatch. Where do we go from here?

Thanks

Dylan

[hyperion17]

Sorry about the long silence guys. Here is the log. I finally got SETool to work and its spat this out. I see I have an IMEI mismatch. Where do we go from here?

Thanks

Dylan

You should restore your GDFS backup ( if you have one). The other option is to repair it with SeTool BOX(gsm service).
Or, find someone to port this patch:

;W580 SW-R8BE001
;disable OTP<>GDFS check "Please Wait" problem
;(c) alexsam
;(p) k790alex
+44140000
1144EBF: D0 E0

to W850_R8BE001, flash with R8BE001 firmware and apply the patch.

[Dylan144GT]

Thanks Hyperion17

I reloaded my GDFS and then flashed the phone. It worked baring switching to a white screen when I applied pressure to the slider. Now when I trun it on it just flashes a white screen. Should I be reflashing it or is it a hardware issue?

Thanks

Dylan

[hyperion17]

You could have a faulty upper keypad circuit board and you need to replace the upper keypad.

[Dylan144GT]

I will have a look into it. Is there any way to test the existing one or is it pretty much a swop and check with new part procedure?

Thanks for all the help! :)

Dylan

[Dylan144GT]

I have a phone that is working! Yay! Thanks so much hyperion17, you da man dawg! :D Seriosly, thanks for the help, its much appreciated!

Dylan