K800i Phone in a weird state

[locash]

Hi all,

Bit of a tale to this one, I was messing around with the old Phone I had given to the girlfriend. I looked in the games folder and there was a file called executor, when I ran it the phone powered off and refuses to come back on.

I have done a bit of reading and discoverd that this was the exploit file used by phone trader to unlock it. However I cant seem to get it back in a state where it will power on, It looks likes i need to flash a new firmware etc. But I'm getting very lost. I have setoolslite, XS++ etc.

This is the output from identify in setoolslite.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxx1 CERT:RED
FLASH CID:49 COLOR:RED
 
Model:K800i
MAPP CXC article: R1CF001     prgCXC1250210_GENERIC_WI
MAPP CXC version: R1CF001
Language Package:T_MOB_INT_A
CDA article: CDA102511/12
CDA version: R12A
Default article: cxc1250490
Default version: R1CF001
 
Extended LOCKED
Operator: MULTIPLE
 
Elapsed:14 secs.

I have tried flashing :

K800_R1CF001_FS_EUROPE_1_RED49
K800_R1CF001_MAIN_GENERIC_WI_RED49

Onto it. The files went on ok but it still wont boot.

Any help you can provide on this will go a long way to getting me out the dog house with the other half! :)

Cheers Locash

[leoboycute15]

use Far manager with fdflasher. it works. see forum.

[locash]

Have tried Far+JDFlasher I'm getting no luck. When I try to go into the BFLASH folder to copy the new main over. The phones screen goes white and the FAR says SetDirectory Failed and the phone crashes.

[leoboycute15]

its weird try looking for another solution. Dont update your phone. It will cost you a lot of proble. mine is updated. I'm having a lot of problem. I cant mod it to k810i using Far, gflash, setool and ultimate unloker. Im having this error message:

01:01:36 D-Ultimate Unlocker v5.02 by Cruiser Team
01:01:36 - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change
01:01:36 Initializing...
! 01:01:36 1. Please see the documentation first (the tab 'Info' or attached .pdf file)
! 01:01:36 2. Choose the phone model
! 01:01:36 3. Select the desired options
! 01:01:36 4. Please connect the phone either via USB while holding 2-5…
! 01:01:36 - or via a serial cable and double-click on it in the device list
01:01:45 Selected phone: Aino™
01:01:45 Connecting via SEMC USB Flash Device (USB1)…
01:01:45 Device driver version: 2.2.0.5
01:01:45 Device driver date: 1-29-2010
01:01:46 Connecting to the baseband CPU...
01:01:46 Entering baseband CPU service mode...
01:01:46 Detected chipset: DB2020
01:01:46 Boot mode: EROM
01:01:46 EROM version: R3A016 prgCXC1250461_EROM_DB2020_WILMA_FOTA_SIMLOCK_FLAFL A_SIBLEY_SEMCUSB
E 01:01:46 Error: 0x889C690F
E 01:01:46 Error: 0xF984FBBB
E 01:01:46 Error data: 0xF984FBBB - 00000004:E3030000
E 01:01:46 Unsupported boot mode
! 01:01:46 Please boot via ROM
E 01:01:46 Failed!
! 01:01:46 To report errors right-click this window

[locash]

Success, its back to life. Just need to unlock it again now!.

[hyperion17]

Hi all,

I looked in the games folder and there was a file called executor, when I ran it the phone powered off and refuses to come back on.

Reflash it in bootrom mode (using "2+5" instead "C"). But it will be locked back on the network.
Connect your phone in XS++3.1 and when it asks if you want to upgrade to CID52, click "YES". Then reflash with :
K800_R8BF003_MAIN_GENERIC_WI_RED52
K800_R8BF003_FS_EUROPE_2_RED52 and as a custom file
HB1-06_Generic_CDA102568_11_R4A_GENERIC_EUROPE_2 . Finally, you can unlock it, using this tutorial:
http://www.topsony.com/forum/unlocki...html#post57483
Read B. How to apply the generated patches to DB2020 CID52 phones

[locash]

HI Hyperion, I got there in the end. Just booted with C and let XS++ update to 52, then applied the above firmware + filesystem. Sim lock went like a dream after that.

Thanks for your help everyone, another issue resolved.