Need help: K530i > W660 no suitable custpack

[KcLKcL]

arif@arif-desktop:~/Desktop/XS$ sudo ./xs
cb_driver_selected idx=0
XS++ v4.1 *BETA* 'CrossFire'
XS++ v4.1 *BETA* 'CrossFire'
driver_idx = 0 count=4
TURN OFF PHONE!
TURN OFF PHONE!
Hold 'C' and connect cable NOW
Hold 'C' and connect cable NOW
Cable connected!
Cable connected!
Phone port opened
Phone port opened
space2 Linux Driver, patched by _Sensible: ACTIVE
space2 Linux Driver, patched by _Sensible: ACTIVE
You can release the 'C' button now.
You can release the 'C' button now.


Starting communications...
Starting communications...
PRESS POWER BUTTON! (BOOT IGNITION!)
PRESS POWER BUTTON! (BOOT IGNITION!)
Baseband ID: 9900
Baseband ID: 9900
Protocol Version: 3.1
Protocol Version: 3.1
Waiting response...
Waiting response...




Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:n/a)
Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:n/a)
...using GDFS name
...using GDFS name
Profiling SEMC device...
Profiling SEMC device...
Platform: DB2020
Platform: DB2020
OTP CID: 51, CLOSED: 1, PAF: 1
OTP CID: 51, CLOSED: 1, PAF: 1
EROM CID: 53
EROM CID: 53
EROM Color: Red
EROM Color: Red
IMEI TAC: 35602702sg��RNh�H�s	��?�
IMEI TAC: 35602702sg��RNh�H�s	��?�
Phone ID: n/a
Phone ID: n/a
Region: APAC
Region: APAC
CDA: CDA102823/20   R2A
CDA: CDA102823/20   R2A
Firmware Version: R8BB001
Firmware Version: R8BB001
EROM: R3A022
EROM: R3A022


XS++ Ready to work...
XS++ Ready to work...


No suitable custpacks for this model!
No suitable custpacks for this model!
No suitable custpacks for this model!
No suitable custpacks for this model!
No suitable custpacks for this model!
No suitable custpacks for this model!

I am using XS++ 4.1, I have a folder like this:

/home/arif/Desktop/XS/cust/K530i/K530i_CDA102823_20_R2A_Customized_Indonesia/tpa/preset/custom/[all the files]

So, what am I doing wrong? The CDA number is correct, and it's same R2A :(

[KcLKcL]

I think this is the culprit:

Phone ID: n/a

But never mind, I used JDFlasher and now it works flawlessly :)

[cnarayan12]

Yes use only Jdflasher it works very well check that customfile and check that your fs files are belong to the same country with that of your custom files