W200i firmware help

[user4e]

18:42:20| Executed on Microsoft Windows XP

18:42:48|

18:42:48| Attempting to open the interface...

18:42:48|

18:42:48| TURN OFF PHONE!

18:42:48| Hold 'C' button on phone and connect phone NOW.

18:42:48| You have 30 seconds...

18:42:48|

18:42:58| Baseband ID: 8040

18:42:58| Protocol Version: 3.1

18:42:58| NEW SECURITY PHONE DETECTED! SWITCHING...

18:42:58| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W200)

18:42:58| ...using GDFS name

18:42:58|

18:42:58| Profiling SEMC phone...

18:42:58| Platform: DB2010

18:42:58| OTP CID: 51

18:42:58| EROM CID: 52

18:42:58| EROM Color: Red

18:42:58| IMEI: 35970701xxxxxx

18:42:58| Phone ID: W200

18:42:58| Region: VFE_LIVE_3

18:42:58| CDA: CDA102738/61 R8A

18:42:58| Firmware Version: R4GB001

18:42:58| EROM: n/a

18:42:58| Ready for operation!

18:57:04|

18:57:04| Sending db2010_db2012_cid52red_flash_r2b012.bin...

18:57:04| Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738

18:57:04| This is a FLASH loader

18:57:05|

18:57:05| Sending db2010_db2012_cid52red_cs_r3b009.bin...

18:57:07| Applet ID: 070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009

18:57:07| This is a CHIPSELECT loader

18:57:07| Activating loader...

18:57:07| Activating GDFS...

18:57:24| This loader is UNLOCKED

18:57:24| Backing up the GDFS...

18:57:27| Stated variables: 1409

18:57:32| Variables found: 845

18:57:35| Variables found: 516

18:57:35| Variables found: 48

18:57:35| Wrote backup to .\Backup\W200_35970701xxxxxx_GDFS_BACKUP.bin

18:57:35| GDFS was backed up successfully!

18:57:35| GDFS operation was successful

18:57:37| Disconnected... Unplug the phone

18:58:03| Shutting down...


What i have to do next. i tried flashing the phone twice unsucsesfuly.
i have no idea which firmware i fave to use so i can flash/unlock the phone :(
using XS++ v3.1 (Darwin) Ready !

[hyperion17]

You can't unlock for free a DB2010 CID52 phone. You can though debrand it, using:
W200_R4JA011_MAIN_GENERIC_ME_RED52
W200_R4JA011_FS_EUROPE_3_RED52
Melinda_Generic_CDA102737_12_R2A_GENERIC_EUROPE_3

[user4e]

You can't unlock for free a DB2010 CID52 phone. You can though debrand it, using:
W200_R4JA011_MAIN_GENERIC_ME_RED52
W200_R4JA011_FS_EUROPE_3_RED52
Melinda_Generic_CDA102737_12_R2A_GENERIC_EUROPE_3

so i have to load the files in the xs++
the main goes to the main tab
fs to filesystem
and where the 3rd one goes ?

[senter]

so i have to load the files in the xs++
the main goes to the main tab
fs to filesystem
and where the 3rd one goes ?

1. Extract archive: Melinda_Generic_CDA102737_12_R2A_GENERIC_EUROPE_3 and create New Folder on PC with name own_custpack -> move folder TPA to own_custpack
2. Create again New Folder on PC -> then move XS++ and folder own_custpack in this New folder.
3. Then make this:

[hyperion17]

You can just select MAIN, FS and CDA and region then hit "Flash"

[tanjot]

After flashing manually upload all the files to tpa/preset/custom....... Using FSX and then start the phone

[user4e]

did that :)
but something else went wrong

20:31:51| Sending db2010_db2012_cid52red_flash_r2b012.bin...

20:31:51| Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738

20:31:51| This is a FLASH loader

20:31:51| Now flashing firmware main...

20:31:51| Flashing c:\documents and settings\owner\desktop\w200i\w200_r4ja011_main_gen eric_me_red52.mbn

20:31:51| Header type: BABE

20:31:51| 318 flashblocks

20:31:53| Binary acknowledge failed with: 15

20:31:53| Command: Error 0x15

20:31:53| Failed sending flashblock 1. Returnvalue 0xF7FE2000

20:31:53| Finishing flash

[user4e]

one more thing
do i have to do the 3 things at once
i mean : main fs and custpack

[user4e]

same thing :
20:51:03| Sending db2010_db2012_cid52red_flash_r2b012.bin...

20:51:04| Applet ID: 061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
20:51:04| This is a FLASH loader
20:51:04| Now flashing firmware main...
20:51:04| Flashing c:\documents and settings\owner\desktop\w200i\w200_r4ja011_main_gen eric_me_red52.mbn
20:51:04| Header type: BABE
20:51:04| 318 flashblocks
20:51:06| Binary acknowledge failed with: 15
20:51:06| Command: Error 0x15
20:51:06| Failed sending flashblock 1. Returnvalue 0xF7FE2000
20:51:06| Finishing flash

[hyperion17]

XS++ thinks the phone is a DB2010 when it's a DB2012. Use SeTool2Lite 1.11.