Hi, I'm new here, nice to meet you guys :)

So, I think the thread explains it all, this is the log from the terminal:

Code:
[root@arif@arif-desktop xs]# ./xs
XS++ v4.1 *BETA* 'CrossFire'
driver_idx = 0 count=4
TURN OFF PHONE!
TURN OFF PHONE!
Hold 'C' and connect cable NOW
Hold 'C' and connect cable NOW
Cable connected!
Cable connected!
Phone port opened
Phone port opened
space2 Linux Driver, patched by _Sensible: ACTIVE
space2 Linux Driver, patched by _Sensible: ACTIVE
You can release the 'C' button now.
You can release the 'C' button now.


Starting communications...
Starting communications...
PRESS POWER BUTTON! (BOOT IGNITION!)
PRESS POWER BUTTON! (BOOT IGNITION!)
Baseband ID: 9900
Baseband ID: 9900
Protocol Version: 3.1
Protocol Version: 3.1
Waiting response...
Waiting response...


Warning: IMEI name does not match GDFS name (IMEI:NU
Warning: IMEI name does not match GDFS name (IMEI:NU
...using GDFS name
...using GDFS name
Profiling SEMC device...
Profiling SEMC device...
Platform: DB2020
Platform: DB2020
OTP CID: 51, CLOSED: 1, PAF: 1
OTP CID: 51, CLOSED: 1, PAF: 1
EROM CID: 53
EROM CID: 53
EROM Color: Red
EROM Color: Red
IMEI TAC: 356027022
IMEI TAC: 356027022
Phone ID: n/a
Phone ID: n/a
Region: APAC
Region: APAC
CDA: CDA102823/20   R2A
CDA: CDA102823/20   R2A
Firmware Version: R8BB001
Firmware Version: R8BB001
EROM: R3A022
EROM: R3A022


XS++ Ready to work...
XS++ Ready to work...


[-------------GDFS Backup Routine-------------]
[-------------GDFS Backup Routine-------------]


driver_idx = 0 count=4
Created '/Backup' dir!
Created '/Backup' dir!
Sending data/loader/db2020_cid01blue_recovery_p3n.bi
Sending data/loader/db2020_cid01blue_recovery_p3n.bi
QA00 Prologue 4844 bytes
QA00 Prologue 4844 bytes
[-------------GDFS Backup Routine-------------]
[-------------GDFS Backup Routine-------------]


driver_idx = 0 count=4
Problem creating ./Backup directory!
Problem creating ./Backup directory!
'/Backup' dir already exists, please rmv it first!
'/Backup' dir already exists, please rmv it first!
QD00 Payload 52672 bytes
QD00 Payload 52672 bytes
Device now in binary mode!
Device now in binary mode!
Applet ID: 070703 1229 NPA4_CXC1329130_DB2020_SEMC_R
Applet ID: 070703 1229 NPA4_CXC1329130_DB2020_SEMC_R
This is an unknown applet type
This is an unknown applet type
Read flash vendor & id...
Read flash vendor & id...
Memory: 897E
Memory: 897E
Sending PRODUCTION_ID APPLET...
Sending PRODUCTION_ID APPLET...
Sending data/loader/db2020_cid01_prodid_p3j.bin...
Sending data/loader/db2020_cid01_prodid_p3j.bin...
Header: Error 0x10
Header: Error 0x10
Sending data/loader/db2020_cid53red_cs_r3a013.bin...
Sending data/loader/db2020_cid53red_cs_r3a013.bin...
Prologue 4760 bytes
Prologue 4760 bytes
Payload 421663 bytes
Payload 421663 bytes
Applet ID: 070904 1245 AN2CXC1250562_DB2020_CSLOADER
Applet ID: 070904 1245 AN2CXC1250562_DB2020_CSLOADER
Applet code is a CHIPSELECT loader
Applet code is a CHIPSELECT loader
Activating loader...
Activating loader...
Activating GDFS...
Activating GDFS...
Checking if loader is unlocked...
Checking if loader is unlocked...
This loader is UNLOCKED
This loader is UNLOCKED
Backing up the GDFS...
Backing up the GDFS...
Stated variables: 1715
Stated variables: 1715
Backup: Error (Could'nt create the output file!)
Backup: Error (Could'nt create the output file!)
usb_reset: No such device


[-------------End GDFS Backup Routine-------------]
Could anyone help me? I've tried:
Restart the computer
Remove SIM cards and M2 memory

I'm using Arch Linux 64bit with GNOME desktop, btw.