I dont have the flash log but identify log is as follows,
00:41:29| XS++ v3.1 (Darwin) Ready !
00:41:29| Executed on Microsoft Windows XP
00:41:34| Attempting to open the interface...
00:41:34| TURN OFF PHONE!
00:41:34| Hold 'C' button on phone and connect phone NOW.
00:41:34| You have 30 seconds...
00:41:40| Baseband ID: 9900
00:41:40| Protocol Version: 3.1
00:41:41| Warning: IMEI name does not match GDFS name (IMEI:W850 GDFS:K700)
00:41:41| ...using IMEI name
00:41:41| Profiling SEMC phone...
00:41:41| Platform: DB2020
00:41:41| OTP CID: 49
00:41:41| EROM CID: 52
00:41:41| EROM Color: Red
00:41:41| IMEI: 35282601xxxxxx
00:41:41| Phone ID: W850
00:41:41| Region: EUROPE_2
00:41:41| CDA: CDA102677/58 R3A
00:41:41| Firmware Version: R1ED001
00:41:41| EROM: R3A016
00:41:41| Ready for operation!
00:41:58| Sending db2020_cid01_prodid_p3j.bin...
00:41:58| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
00:41:58| This is a PRODUCTION_ID loader
00:41:58| Sending db2020_mem_patcher_cid52_r2a006.bin...
00:41:59| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
00:41:59| This is a MEM_PATCHER loader
00:41:59| Sending db2020_cid52red_flash_r2a005.bin...
00:41:59| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
00:41:59| This is a FLASH loader
00:41:59| Sendinging shutdown signal to phone...
00:41:59| Done.. You may now connect again...
00:41:59| Shutting down...
I accidentally deleted the flashing log file. I used following firmware files to flash my phone earlier
1. W850_R1KG001_MAIN_GENERIC_RED52.mbn
2. W850_R1KG001_FS_S_E_EUROPE_RED52.fbn
and chose EUROPE_2(CDA102568/11) under customize file system
Is this information useful in figuring out the fault? I can obviously see the Warning: IMEI name does not match GDFS name (IMEI:W850 GDFS:K700) :( how to fix this first?
Thanks