Strange W660i problem(?)

[Allanidalen]

I bought a SE W660i (R6AD001 CID52) from Internet that says "Inactive SIM" on the screen, I've tried different SIM-cards and all says the same. So I read some on this site and tried to unlock it with setool2liteV1.11, but with no success..


Here's the whole log from SEtool2 lite v1.11:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:359584xxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:359584xxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing D:\Downloads\Mobil\W660_R6AD001_MAIN_GENERIC_FY_RE D52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: D:\Downloads\Mobil\quick_access_W660_R6AD001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C00000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:641 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:359584xxxxxxxx CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: D:\Downloads\Mobil\Remove_SIM_lock_W660_R6AD001_GE NERIC.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:18 secs.

After this it still says "Inactive SIM", and when i enter the SIMlock menu through this code "< * * <" there's this:

Network (Locked)
Network subset (Unlocked)

In both of these menus there are MNC2 and MNC3 menus where I can enter something called a NSCK-key.

What have I done wrong and how do I fix it?

[hyperion17]

Turning the phone off and on again usually solves this kind of problem. If it doesn't work, turn the phone off and remove the battery for a few seconds.

[Allanidalen]

I've tried that, doesn't help..

[riders4sia]

i guess you have bought a barred IMEI handset

[Allanidalen]

Yeah, it's seems like it.. What I understand there's no simple way of changing IMEI yourself?

[riders4sia]

no free way to do that but it can be done with setool box but it is illegal in some countries and i don't have any idea about your country. just give it to a service center for changing IMEI

[hyperion17]

Or, you can try to reflash with R8BB001, then apply the patch called "w660i R8BB001
disable OTP<>GDFS check "Please Wait" problem"

[Allanidalen]

Where can I find this patch? Can't find it in the W660 patches section..

EDIT: Found it.