Flash K750c (chinese) to W800 (also chinese)

[daddo]

sorry but i cant find SE Flash plugin by Darkmen (v.10 or higher) anywhere..
and about far manager, Top Sony Forums this is ok?

Edit:
sorry for double message... i did it by mistake and i didnt find the way to delete it.... sorry....

[daddo]

im trying to follow that guide (from brown to red) but cant find those files it says..
i downloaded this plugin *********
and i downloaded FarManager170.exe and Far By Macuak Soporte Completo from download section..
i guess im dumb... well.. i know im not good at it.. coz i never did this before..

anyway i put the se plugin folder in far 170 plugin folder..
start far
turn off the phone, remove the battery, wait 10 seconds, put the battery in again and close
push C and keep pushing while connect the cable...
but the phone will turn on... instead of remain black (off) like with xs++ and with sony update..
and i cant find a way to access the phone from FAR...

i tried also with the Far By Macuak Soporte Completo (without add the plugin.. but should have it inside (?))
same result.. when connect it, the phone will turn itself on and i cant fid a way to access the files...

im boring, i know.... but please help me...
(sorry again for the double message of yesterday)

[hyperion17]

What bootscript did you selected? Did you pressed F11>SEPF ?

[daddo]

i didnt before (silly me, i didnt read it anywhere before..) but i tried just now with both far version i said before (on win xp)..

both give me the same error after i select SEPF

plugin call error
exception occurred
"unknown exception"
........
............
.....
the plugin will be unloaded!
and when push ok...
internal error....
....
....
...
far manager will be terminated

what can i do?


anyway, i read something about flash directly brown cid with red firmware using jdFlasher... is a nonsense?

PS: sorry for the link before

[hyperion17]

Try "GFlash":
- make sure that your battery is fully charged! (At least 85% up)
- Prepare all the correct main and fs files (should be same versions and phone models)
(main red cid36 and fs red cid36)
- Much better if, before you start Gflash that
your phone already turned off and dettached battery.
- Avoid disconnecting the phone while in flashing process!
FLASHING EROM - BROWN CID36 TO RED CID 36 ONLY!
Under the "REPAIR/GDFS/PATCHING" tab,
enter the RED CID36 RAW erom file (make sure it's RAW)
ex. RED_CID36.Erom (download from topsony)
put the battery back in. (do not connect your phone, not yet!)
then click the "REPAIR/GDFS/PATCH" button
you will get this message:
GFlash version 2.0 beta 6
**** REPAIRING/PATCHING STARTED ****
Turn off the phone.
Hold "C" button and plug USB cable.
as instructed, hold the "c" button and plug it to the usb cable.
(release "c" button only when flashing process is already starting)
and just wait till it's done.(in just a minute or less)
do not shut down Gflash.
disconnect your phone from the usb cable,
but DO NOT TURN IT ON!
remove the battery for a few seconds.
place it back in. (do not connect the cable, not yet!)
FLASH W800_CID36_RED FIRMWARE with Gflash, or XS++

[daddo]

i did it, and i flashed it with xs++ using:
W800_R1N035_MAIN_CHINA_CA_RED36
W800_R1N035_FS_APAC_1_RED36

what should i do with
W800i_CDA102430_101_R3A_Generic_APAC_1 ?

shouldnt i use W800c_CDA102425_3_R8A_Generic_Trade_China ?


following this XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums
i should do also the part
4) Customizing your phone
Compulsory if flashing FS

it says to select select model and region/CDA and click flash.
should i chose
w800 APAC_1 (CDA102430)
or
w800 China... ?

and can i turn on the phone now?

and finally how to add italian T9 (without remove chinese and possibly neither remove english) ?

^^

[daddo]

here the result of XS++

[hyperion17]

The custom file should match FS, so you should choose
W800i_CDA102430_101_R3A_Generic_APAC_1
You can find IT.lng and IT.T9 in download section(w800_Language_EUROPE_5).
Here's the tutorial:
http://www.topsony.com/forum/upgrade...html#post24628
And here's the edited customize.xml you must replace the one from your phone with(unzipped):
customize.rar

[daddo]

hi, thank you so much, i did everything and works....
then go to the right folder, put inside IT.lng and IT.T9, add IT in the tx file, delete the lng.lst and lng.dat and chance the customize file.. close everything, restart.. but still no italian..
what to do?
i tried to extract langauge files from w800_Language_EUROPE_5 but cant...
sefstool v4 will give me a fatal error... cant open file version 23.....

[hyperion17]

hi, thank you so much, i did everything and works....
then go to the right folder, put inside IT.lng and IT.T9, add IT in the tx file, delete the lng.lst and lng.dat and chance the customize file.. close everything, restart.. but still no italian..
what to do?
i tried to extract langauge files from w800_Language_EUROPE_5 but cant...
sefstool v4 will give me a fatal error... cant open file version 23.....

What "tx" file ? I gave you the "customize.xml" you must put in TPA/preset/custom(replace). Why did you tried to extract FS? Didn't you find w800_Language_EUROPE_5 in the download section ?