K750i Ring volume issue

[PhillT]

Hmmm, I have a problem. The tutorial says to remove the SIM before connecting to XS++ for flashing. My phone WILL NOT connect to XS++ unless the SIM is inserted.

Has anyone come across this before, and what was the solution please?

[hyperion17]

Hmmm, I have a problem. The tutorial says to remove the SIM before connecting to XS++ for flashing. My phone WILL NOT connect to XS++ unless the SIM is inserted.

Has anyone come across this before, and what was the solution please?

Even it.s recommended, I never removed SIM, or memory card and nothing happened. What USB flash driver did you use ? I'm not familliar with MAC OS, does your PC recognize the phone as a device ? Don't you have a friend with Windows OS ?

[PhillT]

I am using Windows XP (on VMWARE on the mac) so no issues there.

I got around the problem of removing the SIM by finding an old one and replacing with it.

I have flashed all the "ifs/settings/acoustic" files with the recommended files ( Extreme Power V1) and it achieved nothing. The ring volume was no better at all.

A friend has the same phone as mine, but with R1N035 CID36 RED, so I downloaded that and flashed it with that, but now the phone comes up with the following message when I switch it on:- "Configuration Error. Please contact your Network Operator or Service Centre"

I can still connect to XS++ ok though.

The tutorial says that I need 3 files to successfully flash,
1. Main firmware xxxx.MBN
2. File System xxxxx.FBN
3. Custom Pack xxxxx.RAR

All the Firmware files I can find on this site are File System xxxx.fbn
I have found a Main xxxx.mbn on another site, but it is Europe EU1 and my phone is EU2, is that going to be a problem?
""EDIT"" The Main Firmware file I found on the other site turns out to be xxxx.RAR, not xxxx.MBN, so now I am lost again. Is the tutorial wrong? Can a Main be .RAR??
""EDIT found a Eu2 MBN :-)

Will re flash and see what happens.


Thanks again.

I have re-flashed with:-
K750_r1ca021_main_eu_2_cl_red36_mbn as the Main Firmware
and
K750_r1ca021_main_eu_2_cl_red36_fbn as the File System Firmware

RESULT:- Binary Acknowledge Failed with: 89

and XS++ has locked with only one option: STOP which carries a warning that to do so may damage the phone.

Please, what can I do to retrieve this situation?

Thanks.