Hi all

Today I was calling a no. and phone got hung. After waiting for a min nothing happened so I removed the battery. After removing the battery its not turning on. When I press the power button screen and keypad lights glow and turns off as soon as I leave it. So I searched and found re flash it using XS++, during XS++ it gets stuck here-

20:36:33| XS++ v3.1 (Darwin) Ready !
20:36:37| Executing SEMC Smartphone Operations!
20:36:37| Please hold boot key ('@' or 'C') and connect device...
20:36:57| Master Port detected: COM52
20:36:58| Slave Port detected: COM53
20:36:58| Opening Port!
20:36:58| INIT MASTER...OK!
20:36:58| PHONE INFO SAMPLED...OK!
20:36:58| EPOC APPLET HEADER SENT...OK!
20:36:58| APPLET BODY SENT...OK!
20:36:58| SHUTTING DOWN MASTER...OK!
20:37:00| Baseband ID: 7100
20:37:00| Protocol Version: 3.1
20:37:00| NEW SECURITY PHONE DETECTED! SWITCHING...
20:37:01| Speed set to 460800
20:37:01|
20:37:01| Sending db2000_cid03_prodid_p3b.bin...

after this point nothing happens. So please guide me what to do now.