K550i Error,CsLoader..GDFS,EROM,or dead? PLS HELP

[Ph03n1x]

My K550i got white screen, then turn off, didnt work at all for like an year, and now got it back with white screen again... And i got it to work once for 7 hours normally, no white screen... Then it turned off and nothing... I cant turn it on, sometimes i get red light blinking, sometimes, only once, sometimes nothing. This is log from XS++:

07:56:00| Baseband ID: 9900
07:56:00| Protocol Version: 3.1
07:56:01| Phone name detected!
07:56:01| 
07:56:01| Profiling SEMC phone...
07:56:01| Platform: DB2020
07:56:01| OTP CID: 51
07:56:01| EROM CID: 52
07:56:01| EROM Color: Red
07:56:01| IMEI: 35851601xxxxxx
07:56:01| Phone ID: K550
07:56:01| Region: S_E_EUROPE
07:56:01| CDA: CDA102743/145   R5A
07:56:01| Firmware Version: R6BC002
07:56:01| EROM: R3A022
07:56:01| Ready for operation!

When I try back up GDFS I get this:

08:02:12| Sending db2020_cid01_prodid_p3j.bin...

And nothing happening for a looong time... Down says: Sending Aplet Csloader.

With SeTool2light I got error same error abt Csloader. I cant even back up my gdfs.
You think it's gdfs or EROM, how can i fix it?

Any help? PLS

[senter]

The problem is GDFS. If you have GDFS backup try to restore.
But if see this "CSloader refused to start GDFS services,error is:29" or "set_gdfs_props failed, exiting" -> must go to service.

[Ph03n1x]

Yes I see this from setool:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:11 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:358516018...... CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:4 secs.

But I red somewhere that it can be fixed with newer version of setool. Just flashing it again. Some guy has the same error and he flashed it here is the link:

set_gdfs_props failed W810i - GSM-Forum

This I am getting when try to read gdfs:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:358516018....... CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:7 secs.

And this when I try to UNLOCK/REPAIR:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.


ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:358516....... CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader not responding, changing baudrate..
CSloader not responding at all,sorry..
Elapsed:34 secs.

Any help, please? Tnx

[senter]

Yes I see this from setool:


But I red somewhere that it can be fixed with newer version of setool. Just flashing it again. Some guy has the same error and he flashed it here is the link:

set_gdfs_props failed W810i - GSM-Forum

This I am getting when try to read gdfs:



And this when I try to UNLOCK/REPAIR:



Any help, please? Tnx

Maybe can not read....


Copy/Paste from my 1 post here:

The problem is GDFS. If you have GDFS backup try to restore.
But if see this "CSloader refused to start GDFS services,error is:29" or "set_gdfs_props failed, exiting" -> must go to service.

[Ph03n1x]

I red that, thank you. I do not have gdfs backup because I can not make one. What they will do in service? What tools they will use? I have one friend working in service so I can borrow tool from him so he will not charge me for that. Just tell me what I need.

Thank you.

[riders4sia]

you need setoolbox with logs to repair GDFS, may be it'd be better if you give it to you friend who works in servicing but don't let him upgrade CID to CID53

[Ph03n1x]

I have downloaded setool v0.914014 and v0.9130096 and I'm getting error "Protection card error" Is that because that is not payed version? Is that the program I need? Or I need the real box(physically, with diff cable, not flash usb)? There is no other way to repair it? Can I use gdfs from my friends phone couz he is having the same k550i as mine. Can I write his gdfs and back up mine? What is going to happen then? (Sorry if I'm boring and sorry for noob questions) Thanks...

[riders4sia]

this is for working with box, no free way to use setoolbox without box

[Hellguy]

Before you go to a service center, you can try to upload a Blank GDFS, it might work ;)

[Ph03n1x]

A blank GDFS? What do you mean? Just to upload empty .txt document?