Help I broken my K800i

[Paulbav]

Hello

I hope someone can help me, I am very new to this phone flashing thing and have ttried (unsucsessfully) to upgrade my firmware
and then unlock my phone from orange but it has failed, Doh!!

I am using SETOOL" lite 1.10 (*can't seem to get the update to a later version to work)
and am trying to upgrade to the latest firmware and install the QA patch.

I am using this firware :: Flister ::

It all looked good as it was going down and I even installed the unlock VKP also but when I power up it says on the phones screen "Configuraton error. please contact your network operator or service centre."

Any help would be greatly received, below is tyhe last idetily I did after all the updates went over.

Oh and I didn't realise and did not back up my GDFS first, DOH!!!

Sorry for all the q's on a first post.

Paul


Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:K800i
MAPP CXC article: R8BA024 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BA024
Language Package:ORANGE_GEN
CDA article: CDA102511/47
CDA version: R21A
Default article: cxc1250490
Default version: R1JC002

Network LOCKED
Operator: 234-33

Elapsed:6 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35471601103312 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35471601103312 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
writing C:\Documents and Settings\Paul\Desktop\Main\MAin\K800_R1JC002_MAIN_ GENERIC_WI_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Paul\Desktop\Main\FS\K800_R1JC002_FS_ORAN GE_GEN_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4420
Will flash 221 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Paul\Desktop\Setool2\qamaker\quick_access _K800_R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:819 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35471601103312 CERT:RED
FLASH CID:52 COLOR:RED

Model:K800i
MAPP CXC article: R8BA024 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BA024
Language Package:ORANGE_GEN
CDA article: CDA102511/47
CDA version: R21A
Default article: cxc1250490
Default version: R1JC002

Network LOCKED
Operator: 234-33

Elapsed:12 secs.

[riders4sia]

writing C:\Documents and Settings\Paul\Desktop\Main\MAin\K800_R1JC002_MAIN_GENERIC_WI_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\Documents and Settings\Paul\Desktop\Main\FS\K800_R1JC002_FS_ORAN GE_GEN_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4420
Will flash 221 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Paul\Desktop\Setool2\qamaker\quick_access _K800_R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
Blocks selected OK. Reading blocks: 2

i guess that's your problem and one more thing, you missed the custpack that give you configuration error

[Paulbav]

Thanks, thats odd maybe I posted up the wrong log as i'm sure I inserted the firmware R8BA024, I will check! what is the cust pack you are refering to, I have not heard of this before?

Many thanks

paul

[alexandrya]

try to flash main and fs .. do not forget the custom files to avoid configuration errors