AudioPhile Premium XT WBXML Acoustics for DB3210 / DB3150 phones

[Hiron]

Finally, beta testing phase is finished. Completely rewritten AudioPhile Premium HD Acoustics is released for all A2 (DB3150 and DB3210) and UIQ3 Phones.

It was based on original wbxml from W995 R1FA035. It only has an effects for hearing a music with portable wired handsfree through fastport and 3.5mm jack in Media Player / Walkman Menu.

Notes before read further:
- Example of phones that has Clear Audio Experience: Satio, Aino, W995, W715, W705, W902 and W980
- Example of first generation A2 Phones: K850, G502, V640, W910, W890, Z770, K630 and K660
- Example of UIQ3 phones: P1, P990, P900, M600 W950 and W960
- MegaBass and Bass equalizer is not exist in a phones that has Clear Audio Experience

This acoustics is compatible for ALL A2 DB3210, DB3150 and UIQ3 phones which is using wbxml or aat accoustics. Other phones that utilize ZAPF and APF is not supported.

Attention: First generation A2 Phones doesn't parse *.csv in tpa/preset/acoustics folder. You may give it a try by uploading only wbxml and customize_upgrade.xml files with a consequences of sacrificed / disappointing audio quality :)

Main Features:
- Every volume step had been modified to show consistent performance. The bass is still maintained without distortion at max volume.
- Increased Dynamic Range, depends on acoustic selection, your headphones and audio files quality. Hear the sound as it is, like hearing with your desktop computer.
- 3D Reverberation Surround Effects with minimal impact on lower frequencies. For more effects, it is recommended to turn on Stereo Widening.
- Input signal has been enhanced as high as possible to maintain overall music instruments audibility (it doesn't mean volume).
- Enhanced filtering for all frequencies range to maintains overall music instruments attacks.
- Enjoy enhanced Clear Bass in a phone without Clear Audio Experience.

Changelog:

3.0 (03-09-2009)
- Modifying the help files
- 1. Flat is rewritten to 2. Loud. Much clearer with best loudness. May sound different in 3.5mm jack
- 2. Clear Crytallizer is rewritten to 1. Clear. Adding a little bass. Best clarity
- 3. Dynamite Crystallizer is rewritten to 3. Bass. Reduced distortion. Best bass and good for rock and house music

2.0 (02-09-2009)
- Modifying the help files
- Bomb Crystallizer removed
- Dynamite Crystallizer added. Loud (compared to Flat and Clear). Better midrange, enhanced bass and aggressive style with little distortion. May sound different in 3.5mm jack. Must try!

1.8 (01-09-2009)
- Modifying the help files
- Warmer sound and Clear Bass experience with increased clarity
- Now the acoustic becomes more compatible with A2 first generation phones
- Unneeded csv and wbxml was no longer available
- Sound frequency was equalized from wbxml itself so it's not necessary again to upload customize_upgrade.xml. Try MegaBass equalizer

1.7 (31-08-2009)
- Modifying the help files
- csv is 1dB louder and dynamic range increased
- Added support for UIQ3 phones

1.6 (30-08-2009)
- Modifying the help files
- Renaming Crystallizer Boom to Clear Crystallizer
- Adding Bomb Crystallizer wbxml with maintained bass, attack and treble with aggressive style.

1.5 (29-08-2009)
- Modifying the help files
- Adding Crystallizer Boom wbxml with maintained attack, treble and clarity.

1.1 (28-08-2009)
- Modifying the help files
- Soft style csv is removed because it was not popular
- Louder csv added because there are many demands

1.0 (27-08-2009):
- Eliminating DRC Off and Agressive acoustic
- Adding two csv version: Hard and Soft style.
- More controlled and balanced bass.
- Rewriting the sound distribution algorithm. The sound channel is inverted
- More 3D reverberation
- Crystalized treble
- Modifying the help files

0.9.3 Beta (26-08-2009):
- Added support for 3.5mm jack in W995
- Lowering the highs a little bit in DRC OFF
- Modifying the help files

0.9.2 Beta (25-08-2009):
- Modifying the help files. No need to reupload the acoustic :)

0.9.1 Beta (24-08-2009):
- Released to public for the first time

To summarize the main features above: The main goal of this acoustic is to provides like.no.other unforgettable listening experience while still keeping the volume as low as possible to prevent ears damage and fatigue.
If you compare this acoustic with original W995, you will perceive the music as if it was played louder, although in fact the volume (sound pressure level) is still the same!

All features above can be easily noticed when hearing high quality audio files with Hi-Fi Audiophile Headphones. Mp3 audio files and standard quality headphones will not unleash full potential of this acoustics.

To install the acoustics:
- Extract the file
- Pay an attention to "README - English.txt" carefully. If you already read this post carefully, move to next step
- Open A2Uploader. Press "FileSystem tool" button. Turn off your phone, hold C while connecting your phone with a data cable
- Upload csv files in "csv to tpa-preset-acoustic" folder to tpa/preset/acoustic. Do not do this if your phone is first generation A2 Phones or UIQ3
- There are three types of wbxml, so just choose only one. Upload wbxml files in "wbxml to ifs-settings-acoustic" folder to ifs/settings/acoustic. If your phone is not W995, do not upload phf_jack_play.wbxml
- It's not necessary to upload customize_upgrade.xml in "xml to tpa-preset-custom" folder to tpa/preset/custom. Read further for more information. If your phone has Clear Audio Experience or it was UIQ3, do not do this
- Turn on the phone. It is advised to use manual equalizer or MegaBass. You can customize manual equalizer as you wish.

Attention:
- DO NOT PLUG THE HEADPHONES FASTPORT WHILE PLAYING A MUSIC THROUGH LOUDSPEAKER. Stop the music first, then plug the fastport, or you may get shocked because of that.

There are three types of wbxml files. Upload only one of them.
1. Clear
- Best clarity

2. Loud
- Best loudness

3. Bass
- Best bass

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Q: I have UIQ3 phones. How to use this acoustic?
A: Don't upload csv and customize_upgrade.xml. Just open "wbxml to ifs-settings-acoustic" folder, choose your acoustic, and rename *.wbxml to *.aat. Upload it to your phones.
It's not necessary to upload phf_3_play.aat and phf_jack_play.aat

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Notes about customize_upgrade.xml in "xml to tpa-preset-custom" folder which is uploaded tpa/preset/custom

Normally if you use manual equalizer, it will not allow you to modify it above +/-8bar (8dB).
By using customize_upgrade.xml that is provided, your manual equalizer will set to| +14 | 0 | 0 | 0 | 3 |. It's the same value as MegaBass, but now you can customize it furthermore.

Q: Do I really need to upload it?
A: No. If you don't upload it, you will not get this "extreme" manual equalizer. That's simple.

You may edit customize_upgrade.xml yourself to fit your own needs. Open it with notepad and read the help inside it.
Modify it to a value that is more than +/-15dB will not work. For example, 17dB value will be ignored. +/-15dB would be set instead.

Q: I want to edit more than 15dB. I want | +25 | 0 | 0 | 0 | 5 | !
A: PM me for special version of *.csv. Dynamic range may be reduced :)

Q: I want to tweak manual equalizer a little bit. Can I do this?
A: Sure. But remember that the first bar has been modified to amplify 63Hz frequencies to +14dB, a value that is normally not allowed in manual equalizer which is limited to +/- 8dB.
Because of this reason, Please DO NOT make any change in the first bar of manual equalizer. Look at pictures below:



It was actually | +14 | 0 | 0 | 0 | 5 | instead of | +8 | 0 | 0 | 0 | 5 |

If you lower it, you can't raise it above 8dB again. If you accidentaly lowered it, just reupload customize_upgrade.xml

Q: Too much bass in manual equalizer. How to solve this?
A: Okay, you may modify it. Lower the first bar until it suits your needs. Or you may edit customize_upgrade.xml yourself to fit your own needs.

Q: Can I use any preset other than manual equalizer?
A: You may use your own default preset such as Normal or MegaBass. No stricting rules for these default preset.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Testing and Development Environment:
- Windows 7 64-bit
- Latest WinHex
- Latest A2Uploader
- T700 R3EA037, W995 R1FA035, K850 R1FA035, K660 R1FA035

And last but not least, I would like to says thank you to:
- The God, all of you know the reasons :p
- My Mom and Dad who gives me the facility (computer, headphones, phones)
- Luhccas Cesky, for teaching me about how to modify csv files
- number1, for his stunning amplifier algorithm
- witchking, for his idea to modify manual equalizer via customize_upgrade.xml
- thelaser, for his awesome A2Uploader
- Sony Ericsson and Hewlett-Packard (phones and my computer)
- Bill Gates from Microsoft Corporation for providing the OS as a development environment
- F.J Wechselberger for providing MyPhoneExplorer to capture a screenshots
- Alexander Roshal for providing useful WinRaR program
- and many other person that is impossible to mention it all.

Terms of Use: The creator of this modded acoustics is not responsible for damages or any loss that could happen with your computer, phones, headphones, ears, or any substance that has a relationship with the usage of this acoustics.
By using this acoustics, it means that you are agree with this terms of use.

Comment? Bugs report? Features suggestion for next release? Feel free to reply in this topic :)

|| Download Here ||

|| Original Source ||



Hiron