My W850i has a white flashing screen? Help?

[ali186]

I was using my phone and decided i'll put a few more songs on my phone, as i connected it my screen went all white and started flashing black and white every few seconds. NOW, whenever i turn the phone on i feel it vibrate a second then just flash a white screen every so often then go black and repeat.

I have tried flashing numerous times on XS++ but it say

15:45:25| XS++ v3.1 (Darwin) Ready !

15:45:26| Executed on Microsoft Windows XP

15:46:02|

15:46:02| Attempting to open the interface...

15:46:02|

15:46:02| TURN OFF PHONE!

15:46:02| Hold 'C' button on phone and connect phone NOW.

15:46:02| You have 30 seconds...

15:46:02|

15:46:32| Error: Cannot open phone communication port

15:46:34| Disconnected... Unplug the phone

15:46:59|

15:46:59| Attempting to open the interface...

15:46:59|

15:46:59| TURN OFF PHONE!

15:46:59| Hold 'C' button on phone and connect phone NOW.

15:46:59| You have 30 seconds...

15:46:59|

15:47:30| Error: Cannot open phone communication port

15:47:32| Disconnected... Unplug the phone

i have installed the nessary drivers aswell but still no luck.

Any Help Will Be Muchly Appreciated.

Thanks To Anyone Who Can Help!

[2010]

have you the usbFlash driver?
do you know your CID? if it's 53 try to flash with FAR manager+jdflasher plugin,
your phone is w850 so try with A2uploader or search a payable service Wotan or D ultimat unlocker.
good luck.

[esbenfrese]

Dont got the flashing screen, mine is just constantly white. So I hoped I could figure this one out by myself, but bugger no can do. I tried to follow some of the guides you guys made on the forum <- thx by the way, help is awesome, and still needed :P


First of all the info's from XS++

18:22:01| Baseband ID: 9900
18:22:01| Protocol Version: 3.1
18:22:01| Phone name detected!
18:22:01|
18:22:01| Profiling SEMC phone...
18:22:01| Platform: DB2020
18:22:01| OTP CID: 49
18:22:01| EROM CID: 52
18:22:01| EROM Color: Red
18:22:01| IMEI: 35282601xxxxxx
18:22:01| Phone ID: W850
18:22:01| Region: EUROPE_4
18:22:01| CDA: CDA102568/13 R5A
18:22:01| Firmware Version: R1ED001
18:22:01| EROM: R3A016
18:22:01| Ready for operation!

__________________________________

So i needed the firmwire, and theres like a billion to choose from, and this might be where i got i wrong!? Anyhows found that the XS program told me that my allready istalled firmware was: R1ED001 - Region: EUROPE_4..(i'm from Denmark by the way if that makes a diffrence......... so went for that one!

W850_R1ED001_FS_EUROPE_4_RED49
W850_R1ED001_MAIN_GENERIC_CY_RED49

This is what happend:

18:26:40| Sending db2020_cid01_prodid_p3j.bin...
18:26:40| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
18:26:40| This is a PRODUCTION_ID loader
18:26:40|
18:26:40| Sending db2020_mem_patcher_cid52_r2a006.bin...
18:26:41| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
18:26:41| This is a MEM_PATCHER loader
18:26:41|
18:26:41| Sending db2020_cid52red_flash_r2a005.bin...
18:26:41| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
18:26:41| This is a FLASH loader
18:26:41| Now flashing firmware main...
18:26:41| Flashing c:\documents and settings\esben frese\skrivebord\w850_r1ed001_main_generic_cy_red4 9.mbn
18:26:41| Header type: BABE
18:26:41| 455 flashblocks
18:26:41| Binary acknowledge failed with: 89
18:26:41| Failed
18:26:42| Binary acknowledge failed with: 68
18:26:42| Command: Error 0x68
18:26:42| Failed sending flashblock 1. Returnvalue 0xD0022D00
18:26:42| Finishing flash
18:26:42| Binary acknowledge failed with: 02
18:26:42| Failed
18:26:42| Failed

______________________________________________

UGH!!! Please tell me that i havent destroyed my phone :S.. And what am I doing wrong? Anyone!???? - And thanks for alot.

/Esben Frese - confused Dane :P. - Have a nice day.

[senter]

Dont got the flashing screen, mine is just constantly white. So I hoped I could figure this one out by myself, but bugger no can do. I tried to follow some of the guides you guys made on the forum <- thx by the way, help is awesome, and still needed :P


First of all the info's from XS++

18:22:01| Baseband ID: 9900
18:22:01| Protocol Version: 3.1
18:22:01| Phone name detected!
18:22:01|
18:22:01| Profiling SEMC phone...
18:22:01| Platform: DB2020
18:22:01| OTP CID: 49
18:22:01| EROM CID: 52
18:22:01| EROM Color: Red
18:22:01| IMEI: 35282601xxxxxx
18:22:01| Phone ID: W850
18:22:01| Region: EUROPE_4
18:22:01| CDA: CDA102568/13 R5A
18:22:01| Firmware Version: R1ED001
18:22:01| EROM: R3A016
18:22:01| Ready for operation!

__________________________________

So i needed the firmwire, and theres like a billion to choose from, and this might be where i got i wrong!? Anyhows found that the XS program told me that my allready istalled firmware was: R1ED001 - Region: EUROPE_4..(i'm from Denmark by the way if that makes a diffrence......... so went for that one!

W850_R1ED001_FS_EUROPE_4_RED49
W850_R1ED001_MAIN_GENERIC_CY_RED49

This is what happend:

18:26:40| Sending db2020_cid01_prodid_p3j.bin...
18:26:40| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
18:26:40| This is a PRODUCTION_ID loader
18:26:40|
18:26:40| Sending db2020_mem_patcher_cid52_r2a006.bin...
18:26:41| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
18:26:41| This is a MEM_PATCHER loader
18:26:41|
18:26:41| Sending db2020_cid52red_flash_r2a005.bin...
18:26:41| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
18:26:41| This is a FLASH loader
18:26:41| Now flashing firmware main...
18:26:41| Flashing c:\documents and settings\esben frese\skrivebord\w850_r1ed001_main_generic_cy_red4 9.mbn
18:26:41| Header type: BABE
18:26:41| 455 flashblocks
18:26:41| Binary acknowledge failed with: 89
18:26:41| Failed
18:26:42| Binary acknowledge failed with: 68
18:26:42| Command: Error 0x68
18:26:42| Failed sending flashblock 1. Returnvalue 0xD0022D00
18:26:42| Finishing flash
18:26:42| Binary acknowledge failed with: 02
18:26:42| Failed
18:26:42| Failed

______________________________________________

UGH!!! Please tell me that i havent destroyed my phone :S.. And what am I doing wrong? Anyone!???? - And thanks for alot.

/Esben Frese - confused Dane :P. - Have a nice day.

You wrong !!!
Must see EROM CID, not OTP CID !!!

Must use these files:

W850_R1KG001_MAIN_GENERIC_CY_RED52
W850_R1KG001_FS_EUROPE_4_RED52
HB1-06_Gen_CDA102568_13_R5A_GENERIC_EUROPE_4

[esbenfrese]

Thanks for the quick answer Senter :)...

I found the files you posted and now the flashing progress works - still no hope for the mobil though :(... Its still white and XS++ tells me when i connect the phone that its the old version! - a bit confusing :/.

Heres the log:

17:46:42| Baseband ID: 9900

17:46:42| Protocol Version: 3.1

17:46:43| Phone name detected!

17:46:43|

17:46:43| Profiling SEMC phone...

17:46:43| Platform: DB2020

17:46:43| OTP CID: 49

17:46:43| EROM CID: 52

17:46:43| EROM Color: Red

17:46:43| IMEI: 35282601xxxxxx

17:46:43| Phone ID: W850

17:46:43| Region: EUROPE_4

17:46:43| CDA: CDA102568/13 R5A

17:46:43| Firmware Version: R1ED001

17:46:43| EROM: R3A016

17:46:43| Ready for operation!

17:47:15|

17:47:15| Sending db2020_cid01_prodid_p3j.bin...

17:47:15| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

17:47:15| This is a PRODUCTION_ID loader

17:47:15|

17:47:15| Sending db2020_mem_patcher_cid52_r2a006.bin...

17:47:15| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

17:47:15| This is a MEM_PATCHER loader

17:47:15|

17:47:15| Sending db2020_cid52red_flash_r2a005.bin...

17:47:15| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

17:47:15| This is a FLASH loader

17:47:15| Now flashing firmware main...

17:47:16| Flashing c:\documents and settings\esben frese\skrivebord\w 850i\w850_r1kg001_main_generic_cy_red52.mbn

17:47:16| Header type: BABE

17:47:16| 460 flashblocks

17:51:01| Finishing flash

17:51:01| Done flashing

17:51:01| Now flashing filesystem...

17:51:01| Flashing c:\documents and settings\esben frese\skrivebord\w 850i\w850_r1kg001_fs_europe_4_red52.fbn

17:51:01| Header type: BABE

17:51:01| 237 flashblocks

17:52:57| Finishing flash

17:52:58| Done flashing

17:52:58| Flashing was successful

17:53:00| Disconnected... Unplug the phone

17:53:12|

17:53:12| Attempting to open the interface...

17:53:12|

17:53:12| TURN OFF PHONE!

17:53:12| Hold 'C' button on phone and connect phone NOW.

17:53:12| You have 30 seconds...

17:53:12|

17:53:18| Baseband ID: 9900

17:53:18| Protocol Version: 3.1

17:53:19| Phone name detected!

17:53:19|

17:53:19| Profiling SEMC phone...

17:53:19| Platform: DB2020

17:53:19| OTP CID: 49

17:53:19| EROM CID: 52

17:53:19| EROM Color: Red

17:53:19| IMEI: 35282601xxxxxx

17:53:19| Phone ID: W850

17:53:19| Region: EUROPE_4

17:53:19| CDA: CDA102568/13 R5A

17:53:19| Firmware Version: R1ED001

17:53:19| EROM: R3A016

17:53:19| Ready for operation!


________________________________________

As you can see the phone dosent seem to have the new firmwire even though the XS told me that the update was succesfull :P... dont get it.

Yet another time - a big THANKS for the help - and can you help me more!?

/Esben Frese

[riders4sia]

change LCD (screen), it is the only hope for you. flashing wouldn't help coz it's a hardware fault

[esbenfrese]

I see.

Well that's a bit sad :P.

But thanks for the answer mate.

Have a nice day =) and thx for the help all.

[haliv1]

Ohhh I'm not sure if I'm posting this correctly but I'm so lost with trying to fix my phone, Details below but have no idea what files to download or how to use them, Yes I'm fresh!
It's all for the white screen problem...

7:28:01| Turn off phone
17:28:01| Hold 'C' button on phone and connect phone.
17:28:01| You have 30 seconds.
17:28:01|
17:28:09| Baseband ID: 9900
17:28:09| Hardware Platform: DB2020
17:28:09| Protocol Version: 3.1
17:28:09| Phone name detected!
17:28:09|
17:28:09| Profiling SEMC phone...
17:28:09| Baseband ID: DB2020
17:28:09| OTP CID: 51
17:28:09| EROM CID: 52
17:28:09| EROM Color: Red
17:28:09| IMEI: 35908701xxxxxx
17:28:09| Phone ID: K800
17:28:09| Network: EUROPE_2
17:28:09| CDA: CDA102511/2 R2A
17:28:09| Firmware Version: R8BF003
17:28:09| EROM: R3A022
17:28:09| Ready for operation!

[riders4sia]

Start here : Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums
and use the following files;
K800_R8BF003_MAIN_GENERIC_WI_RED52
K800_R8BF003_FS_EUROPE_2_RED52
HB1-06_Gen_CDA102568_11_R6A_GENERIC_EUROPE_2
if this doesn;t help then it is probably a hardware fault i.e LCD damage, changing LCD will solve your problem

[haliv1]

when I try and extract setool I get this error message?


! Cannot execute "C:\DOCUME~1\Owner\LOCALS~1\Temp\Rar$EX44.079\seto ol2lite_db2020\setool2lt.exe"