here is the error i get from XS++ after customizing and flashing...
11:27:12| ++++++++++++++++++++++++++++++++++++++++++++++
11:27:23| PORT STATUS: ACTIVE
11:27:23| baseband ID: 7100
11:27:23| Hardware Platform: db2000 Marita full
11:27:23| Protocol Version: 3.1
11:27:23| Sending loaders\db2000_cid00_prodid_r2b.bin...
11:27:23| This is a PRODUCTION -ID loader
11:27:23| Activating GDFS...
11:27:23| Cannot open GDFS
11:27:23| Activating GDFS...
11:27:23| Cannot open GDFS
11:27:23| Activating GDFS...
11:27:23| Cannot open GDFS
11:27:23| Activating GDFS...
11:27:23| Cannot open GDFS
11:27:23| Activating GDFS...
11:27:23| Cannot open GDFS
11:27:23| Warning: IMEI name does not match GDFS name (IMEI:W900 GDFS:n/a)
11:27:23| ...using IMEI name
11:27:23| ++++++++++++++++++++++++++++++++++++++++++++++
11:27:23| PHONE INFO
11:27:23| ++++++++++++++++++++++++++++++++++++++++++++++
11:27:23| DBID: db2000
11:27:23| OTP CID: 49
11:27:23| EROM CID: 49
11:27:23| EROM color: Red
11:27:23| IMEI: 35785800xxxxxx
11:27:23| Phone: W900
11:27:23| Operator: n/a
11:27:23| CDA: n/a n/a
11:27:23| Firmware n/a
11:27:23| EROM: n/a
11:27:23| ++++++++++++++++++++++++++++++++++++++++++++++
11:27:23| Ready for operation
11:27:50| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
11:27:50| Custpack: EMEA_1 (CDA102419/42)(W900)
11:27:50| Generic(non-branded) custpack: No
11:27:50| Allowed languages: en, et, pl, lv, lt, ru, uk,
11:27:50| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11:29:09| +++ Sending CS_LOADER...
11:29:09| Sending loaders\db2000_cid49red_cs_r4g.bin...
11:29:12| This is a CHIPSELECT loader
11:29:12| Activating loader...
11:29:12| Activating GDFS...
11:29:12| Checking if loader is unlocked...
11:29:12| This loader is LOCKED (errorcode=30)
11:29:12| ***** AuthA (cmd 05-42) hacking
11:29:26| Try #1000 and counting...
11:29:40| Try #2000 and counting...
11:29:54| Try #3000 and counting...
11:30:08| Try #4000 and counting...
11:30:11| ...4201
11:30:11| Matches: 0:0003956, 1:000244, 2:0001, 3:0
11:30:11| Totals: 0:0003956, 1:000244, 2:0001, 3:0
11:30:11| Theory: 0:0003938, 1:000261, 2:0001, 3:0
11:30:11| ***** Reset (cmd 01-0C)
11:30:11| Waiting for the phone to disconnect
11:30:11| Waiting for the phone to reconnect
what happens next, the phone disconnects from XS++ and then reconnects as a USB flash drive. XS++ does not continue anymore, it stops there. when i turn on the phone, it displays "Configuration error. Please contact your network operator...." what can i do to resolve this problem? i'm already thinking of bringing it to SE Service Center if nothing works here. thanks in advance guys.