K800 dead? Help please!

[Polaris-17]

Hi everyone!

One time, when I inserted a Simcard, phone loaded with Sony Ericsson logo, and white screen. I went to the service, and they said that software is damaged. I tried to repair software myself, and I probably dead my phone. Can you help please?

Here is the log before I flash my phone:

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED
FLASH CID:52 COLOR:RED
 
Model:K800i
Brand:Generic
MAPP CXC article: R1GB001     prgCXC1250210_GENERIC_WI
MAPP CXC version: R1GB001
Language Package:CENT_EUROPE
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1250490
Default version: R1GB001
 
Network LOCKED
Operator: 260-01
 
Elapsed:18 secs.

Here is log from flashing:

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\SE\K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\SE\K800_R8BF003_FS_CENT_EUROPE_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4580
Will flash 229 blocks...
verify block error
last blk:46A70000,00010000
Elapsed:1050 secs.

Phone do not power on, do not power in flash mode... Does nothing.
Thank you very much for help!
Ps: Sorry for my very bad English, I am beginner.

[riders4sia]

is your barttery fully charged? try other MAIN and FS and flash again, you can get the working MAIN and FS at the TopSony download area

[Polaris-17]

First of all, thanks for reply.

Battery was fully charged. But I cannot connect phone. Phone do not power, and my computer do not recognize it...

Edit: May be flash area damaged?

[riders4sia]

try this by senter
1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main, then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.

[sanfelice]

Try to find the correct MAIN and FS for your CID 52 and a CDA compatible.
After that try flash the phone holding 2+5 instead of "C" button.

[emaxe]

I have the same problem with my w715 =( where can i download Setool?

[sanfelice]

You can download Setool2 from download section or here (Top Sony Forums)

\,,/

[Polaris-17]

Ok, salved. Sorry for making problems, it really was battery problem...

I give successful log:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
 
if you like LITE edition - please visit www.setool.net and buy FULL.
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35731501356067 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
 
REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"
 
HOLD "C" BUTTON AND ATTACH PHONE
 
CID52 BYPASS PROCEDURE FINISHED
 
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\SE\K800_R8BF003_MAIN_GENERIC_WI_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\SE\K800_R8BF003_FS_CENT_EUROPE_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4580
Will flash 229 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\SE\Remove_SIM_lock_K800_R8BF003_GENERIC.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:815 secs.

Thank you all!

[Polaris-17]

Solved, closing thred