Hello all

I have k530i set , i have changed the firmware to w660i and was successfull and its being working for almost 9 months there was not at all a problem

yesterday i switch off the mobile . then when i tried to switch on there is nothing in the screen
the phone seems like DEAD :( :crying:

Now i have setool xs++ and kulakendi client

Now xs++ does not detect the phone when i try to use 2+5 combination it shows .5x continuing something like that

then i tried unlock/repair as said in akshayy.com then i got this log
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition – please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:359019xx334099 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can’t read SCRC unit
Elapsed:84 secs.
Elapsed:84 secs.

when i bought the set i have taken the gdfs backup of K530i
and when i changed that to w660i i took one more backup

then i tried to use write gdfs using 2+5 detection in setool i got this log

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3590190133**99 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:8 secs.

NOw is the PHONE DEAD ANY OPTION LEFT FOR ME
CAN THIS PHONE BE SERVICED AT SERVICE CENTRE

HOW MUCH A NEW EROM CAN COST