Helppppp K610i dead after flashed

[kissnguyen]

Hello everyone.
Please help me.
I used seatoollite to flash my k610 and unlock simlock, but poorly for me the flash went wrong and now i can not turn the phone on. Still detected by Xs++ or Seatoollite.
What i can do ....?
I will post the log if needed.
Help please............................................ .......
:eek::eek::eek::eek::eek::eek::eek::eek::eek:

[senter]

Hello everyone.
Please help me.
I used seatoollite to flash my k610 and unlock simlock, but poorly for me the flash went wrong and now i can not turn the phone on. Still detected by Xs++ or Seatoollite.
What i can do ....?
I will post the log if needed.
Help please............................................ .......
:eek::eek::eek::eek::eek::eek::eek::eek::eek:

Use XS++ v 3.1 and flash K610 Main & FS ( and CDA = custom file for your region ).

[kissnguyen]

Use XS++ v 3.1 and flash K610 Main & FS ( and CDA = custom file for your region ).

Thanks for the reply and i did as you advice but still unable to turn on the phone.
What would i do more? here is the log file:
21:34:24| XS++ v3.1 (Darwin) Ready !

21:34:24| Executed on Microsoft Windows XP

21:34:31|

21:34:31| Attempting to open the interface...

21:34:31|

21:34:31| TURN OFF PHONE!

21:34:31| Hold 'C' button on phone and connect phone NOW.

21:34:31| You have 30 seconds...

21:34:31|

21:34:36| Baseband ID: 9900

21:34:36| Protocol Version: 3.1

21:34:36| Phone name detected!

21:34:36|

21:34:36| Profiling SEMC phone...

21:34:36| Platform: DB2020

21:34:36| OTP CID: 49

21:34:36| EROM CID: 52

21:34:36| EROM Color: Red

21:34:36| IMEI: 35171001xxxxxx

21:34:36| Phone ID: K610

21:34:36| Region: EUROPE_4

21:34:36| CDA: CDA102497/6 R3A

21:34:36| Firmware Version: R1JG001

21:34:36| EROM: R3A016

21:34:36| Ready for operation!

21:36:22|

21:36:22| Sending db2020_cid01_prodid_p3j.bin...

21:36:22| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

21:36:22| This is a PRODUCTION_ID loader

21:36:22|

21:36:22| Sending db2020_mem_patcher_cid52_r2a006.bin...

21:36:22| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

21:36:22| This is a MEM_PATCHER loader

21:36:22|

21:36:22| Sending db2020_cid52red_flash_r2a005.bin...

21:36:23| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

21:36:23| This is a FLASH loader

21:36:23| Now flashing firmware main...

21:36:23| Flashing c:\fs\k610_r1jg001_fs_europe_4_red52.fbn

21:36:23| Header type: BABE

21:36:23| 117 flashblocks

21:37:20| Finishing flash

21:37:20| Done flashing

21:37:20| Flashing was successful

21:37:22| Disconnected... Unplug the phone

:confused::confused::confused::confused::confused:

[senter]

Thanks for the reply and i did as you advice but still unable to turn on the phone.
What would i do more? here is the log file:
21:36:23| Now flashing firmware main...

21:36:23| Flashing c:\fs\k610_r1jg001_fs_europe_4_red52.fbn

You wrong!
You flash Main Firmware with File System (*.fbn) ??? - this is big mistake.

Must flash Main with *.mbn file !!!
File System with *.fbn file!
See here screenshots:

[kissnguyen]

Ok Thanks again for your reply but where i can get the mbn file?

[senter]

Ok Thanks again for your reply but where i can get the mbn file?

From Download section.

[kissnguyen]

Ok thanks alot for helping me out .
Im flashing it now and i will ask you for more intructions if something goes wrong.

Big Thanks from finland.

From Download section.

Ok now just finished flashing main but still unable to turn on here is the log file please help me out:
22:35:15| Hold 'C' button on phone and connect phone NOW.

22:35:15| You have 30 seconds...

22:35:15|

22:35:15| Baseband ID: 9900

22:35:15| Protocol Version: 3.1

22:35:15| Phone name detected!

22:35:15|

22:35:15| Profiling SEMC phone...

22:35:15| Platform: DB2020

22:35:15| OTP CID: 49

22:35:15| EROM CID: 52

22:35:15| EROM Color: Red

22:35:15| IMEI: 35171001xxxxxx

22:35:15| Phone ID: K610

22:35:15| Region: EUROPE_4

22:35:15| CDA: CDA102497/6 R3A

22:35:15| Firmware Version: R1JG001

22:35:15| EROM: R3A016

22:35:15| Ready for operation!

22:35:20|

22:35:20| Sending db2020_cid01_prodid_p3j.bin...

22:35:20| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

22:35:20| This is a PRODUCTION_ID loader

22:35:20|

22:35:20| Sending db2020_mem_patcher_cid52_r2a006.bin...

22:35:21| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

22:35:21| This is a MEM_PATCHER loader

22:35:21|

22:35:21| Sending db2020_cid52red_flash_r2a005.bin...

22:35:21| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

22:35:21| This is a FLASH loader

22:35:21| Now flashing firmware main...

22:35:21| Flashing c:\fs\k610_r1jg001_main_generic_th_red52.mbn

22:35:21| Header type: BABE

22:35:21| 460 flashblocks

22:39:11| Finishing flash

22:39:11| Done flashing

22:39:11| Flashing was successful

22:39:13| Disconnected... Unplug the phone

Hi Again .
I restore the CDA and GDFS from backup but still unable to turn on the phone.
Any idea?

Thanks

[senter]

Ok now just finished flashing main but still unable to turn on here is the log file please help me out:
22:35:15| Hold 'C' button on phone and connect phone NOW.

22:35:15| You have 30 seconds...

22:35:15|

22:35:15| Baseband ID: 9900

22:35:15| Protocol Version: 3.1

22:35:15| Phone name detected!

22:35:15|

22:35:15| Profiling SEMC phone...

22:35:15| Platform: DB2020

22:35:15| OTP CID: 49

22:35:15| EROM CID: 52

22:35:15| EROM Color: Red

22:35:15| IMEI: 35171001xxxxxx

22:35:15| Phone ID: K610

22:35:15| Region: EUROPE_4

22:35:15| CDA: CDA102497/6 R3A

22:35:15| Firmware Version: R1JG001

22:35:15| EROM: R3A016

22:35:15| Ready for operation!

22:35:20|

22:35:20| Sending db2020_cid01_prodid_p3j.bin...

22:35:20| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

22:35:20| This is a PRODUCTION_ID loader

22:35:20|

22:35:20| Sending db2020_mem_patcher_cid52_r2a006.bin...

22:35:21| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

22:35:21| This is a MEM_PATCHER loader

22:35:21|

22:35:21| Sending db2020_cid52red_flash_r2a005.bin...

22:35:21| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

22:35:21| This is a FLASH loader

22:35:21| Now flashing firmware main...

22:35:21| Flashing c:\fs\k610_r1jg001_main_generic_th_red52.mbn

22:35:21| Header type: BABE

22:35:21| 460 flashblocks

22:39:11| Finishing flash

22:39:11| Done flashing

22:39:11| Flashing was successful

22:39:13| Disconnected... Unplug the phone

1. Flash File System with K610_R1JG001_FS_EUROPE_4_RED52

2. Mark Customize File System
Then select
Phone Model K610
CDA and Region Europe_4
3. Flash Main with K610_R1JG001_MAIN_GENERIC_TH_RED52

[kissnguyen]

Thanks alot Senter.
I need to path the Simlock but everytime i connect to Usb the phone turn on to usb mode pressing C or not.??
could u help me out this time? hihih last time not turn on , this time turn on always when using se tool to path..

[senter]

Thanks alot Senter.
I need to path the Simlock but everytime i connect to Usb the phone turn on to usb mode pressing C or not.??
could u help me out this time? hihih last time not turn on , this time turn on always when using se tool to path..

Start SimLockPatchGen.exe then drag and drop K610_R1JG001_MAIN_GENERIC_TH_RED52.mbn and you have unlock patch (*.vkp)
Use Setool2lite1.11 and reinsert battery befor begin!
1. Phone type: K610
2. On Files click Add and select K610_R1JG001_MAIN_GENERIC_TH_RED52.mbn
3. On MISC files select unlock patch.
4. Click Flash button then hold "C" on phone and connect with USB cable.

After "part3" you must remove USB cable from phone and reinsert battery.
Then click Ready button on Setool and again hold "C" button and again connect with USB cable.

After flashing Main Setool ask you YES or NO - must click NO to apply patch!!!
When button Stop on Setool is active - again reinsert battery and turn on phone.
If you will add/remove other patches easy must apply Quick access patch (drag and drop Main to qamaker.exe)