Helppppp K610i dead after flashed

[kissnguyen]

Hi there
Yes I just charged full before flashing.
full bat.

[kissnguyen]

how much charge is in ur battry and can u post a new log up from se tool light v1.11

Here is the log by se tool
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED

Model:K610i
MAPP CXC article: R1JG001 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1JG001
Language Package:EUROPE_4
CDA article: CDA102497/6
CDA version: R3A
Default article: cxc1250376
Default version: R1JG001

Service provider LOCKED
Operator: 244-91

Elapsed:24 secs.

[kissnguyen]

here is the log i reflashed:
3:26:52| Executed on Microsoft Windows XP
23:26:56|
23:26:56| Attempting to open the interface...
23:26:56|
23:26:56| TURN OFF PHONE!
23:26:56| Hold 'C' button on phone and connect phone NOW.
23:26:56| You have 30 seconds...
23:26:56|
23:26:56| Baseband ID: 9900
23:26:56| Protocol Version: 3.1
23:26:57| Phone name detected!
23:26:57|
23:26:57| Profiling SEMC phone...
23:26:57| Platform: DB2020
23:26:57| OTP CID: 49
23:26:57| EROM CID: 52
23:26:57| EROM Color: Red
23:26:57| IMEI: 35171001xxxxxx
23:26:57| Phone ID: K610
23:26:57| Region: EUROPE_4
23:26:57| CDA: CDA102497/6 R3A
23:26:57| Firmware Version: R1JG001
23:26:57| EROM: R3A016
23:26:57| Ready for operation!
23:27:11|
23:27:11| Sending db2020_cid01_prodid_p3j.bin...
23:27:12| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
23:27:12| This is a PRODUCTION_ID loader
23:27:12|
23:27:12| Sending db2020_mem_patcher_cid52_r2a006.bin...
23:27:12| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
23:27:12| This is a MEM_PATCHER loader
23:27:12|
23:27:12| Sending db2020_cid52red_flash_r2a005.bin...
23:27:12| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
23:27:12| This is a FLASH loader
23:27:12| Now flashing firmware main...
23:27:12| Flashing c:\fs\k610_r1jg001_main_generic_th_red52.mbn
23:27:12| Header type: BABE
23:27:13| 460 flashblocks
23:30:59| Finishing flash
23:30:59| Done flashing
23:30:59| Now flashing filesystem...
23:30:59| Flashing c:\fs\k610_r1jg001_fs_europe_4_red52.fbn
23:30:59| Header type: BABE
23:30:59| 117 flashblocks
23:31:56| Finishing flash
23:31:56| Done flashing
23:31:56| Flashing was successful
23:31:58| Disconnected... Unplug the phone

[kissnguyen]

Hi there Guys
After a few reflashed i now get the phone turn on , thanks you Guys alot. But how can i get the simlock path???
here is the log when i tried to path it.
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Starting to process VKP patch script: C:\fs\K610_R1JG001_Remove_SIM_lock.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Block @ $44700000 read error. Have only: 00000000 bytes
Elapsed:9 secs.

[philzfog]

do u have the bypass box ticked and did u make the patch from there main u flashed to it

[kissnguyen]

Poorly me again , now the phone is ALWAYS turnon when i connect to usb no matter what pressing C or not--..........????

[senter]

Ok now just finished flashing main but still unable to turn on here is the log file please help me out:
22:35:15| Hold 'C' button on phone and connect phone NOW.

22:35:15| You have 30 seconds...

22:35:15|

22:35:15| Baseband ID: 9900

22:35:15| Protocol Version: 3.1

22:35:15| Phone name detected!

22:35:15|

22:35:15| Profiling SEMC phone...

22:35:15| Platform: DB2020

22:35:15| OTP CID: 49

22:35:15| EROM CID: 52

22:35:15| EROM Color: Red

22:35:15| IMEI: 35171001xxxxxx

22:35:15| Phone ID: K610

22:35:15| Region: EUROPE_4

22:35:15| CDA: CDA102497/6 R3A

22:35:15| Firmware Version: R1JG001

22:35:15| EROM: R3A016

22:35:15| Ready for operation!

22:35:20|

22:35:20| Sending db2020_cid01_prodid_p3j.bin...

22:35:20| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

22:35:20| This is a PRODUCTION_ID loader

22:35:20|

22:35:20| Sending db2020_mem_patcher_cid52_r2a006.bin...

22:35:21| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

22:35:21| This is a MEM_PATCHER loader

22:35:21|

22:35:21| Sending db2020_cid52red_flash_r2a005.bin...

22:35:21| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

22:35:21| This is a FLASH loader

22:35:21| Now flashing firmware main...

22:35:21| Flashing c:\fs\k610_r1jg001_main_generic_th_red52.mbn

22:35:21| Header type: BABE

22:35:21| 460 flashblocks

22:39:11| Finishing flash

22:39:11| Done flashing

22:39:11| Flashing was successful

22:39:13| Disconnected... Unplug the phone

1. Flash File System with K610_R1JG001_FS_EUROPE_4_RED52

2. Mark Customize File System
Then select
Phone Model K610
CDA and Region Europe_4
3. Flash Main with K610_R1JG001_MAIN_GENERIC_TH_RED52

[kissnguyen]

Thanks alot Senter.
I need to path the Simlock but everytime i connect to Usb the phone turn on to usb mode pressing C or not.??
could u help me out this time? hihih last time not turn on , this time turn on always when using se tool to path..

[senter]

Thanks alot Senter.
I need to path the Simlock but everytime i connect to Usb the phone turn on to usb mode pressing C or not.??
could u help me out this time? hihih last time not turn on , this time turn on always when using se tool to path..

Start SimLockPatchGen.exe then drag and drop K610_R1JG001_MAIN_GENERIC_TH_RED52.mbn and you have unlock patch (*.vkp)
Use Setool2lite1.11 and reinsert battery befor begin!
1. Phone type: K610
2. On Files click Add and select K610_R1JG001_MAIN_GENERIC_TH_RED52.mbn
3. On MISC files select unlock patch.
4. Click Flash button then hold "C" on phone and connect with USB cable.

After "part3" you must remove USB cable from phone and reinsert battery.
Then click Ready button on Setool and again hold "C" button and again connect with USB cable.

After flashing Main Setool ask you YES or NO - must click NO to apply patch!!!
When button Stop on Setool is active - again reinsert battery and turn on phone.
If you will add/remove other patches easy must apply Quick access patch (drag and drop Main to qamaker.exe)

[kissnguyen]

Hi
unable to flash the unlock simpatch see the log file, because the phone is always turn on. Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Abort all operations.
Can't load ID loader !
Elapsed:156 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED

Model:K610i
MAPP CXC article: R1JG001 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1JG001
Language Package:EUROPE_4
CDA article: CDA102497/6
CDA version: R3A
Default article: cxc1250376
Default version: R1JG001

Service provider LOCKED
Operator: 244-91

Elapsed:6 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001604762 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Enable either "Bypass DB2020 Security" or "Use quick access" !!!
Elapsed:8 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:23 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:24 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
Abort all operations.
embedded flashloader not responds !
Elapsed:17 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:39 secs.