I've bought a k800i that looks very good but has a software problem and when I connect it to a computer the red light blinks ( I think it has a broken gdfs). I thought I could fixed it with setool2lite 1.11, but this is what happens when I connect it to the program by presing 2+5 ( because by holding c doesn't work):
Welcome to SEtool2 ( LITE edition ) v 1.1
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Identify

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801296262 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:84 secs.

read gdfs

Will backup GDFS now.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801296262 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
ldr_on_ldr hdr no ack (10)
CSloader uploading failed,exiting
Elapsed:5 secs.

unlock/repair

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801296262 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:83 secs.


PLEASE HELP!!!!!!!