Died K800i

[philzfog]

does it still have a white screen after u restored the gdfs back up ?

[Surpriser]

im tried to reflash it with setool and give this error : "Header not acceped.phone will revovery" and can't do anything(Flash)

sometimes(every 1/15) sonyericsson logo shows but quickly restart and white screen shows again but usually(every 14 from 15) white screen shows.but it's interesting for me that when i restored GDFS see this error again:(Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K810) in XS++.

[trimesh]

im tried to reflash it with setool and give this error : "Header not acceped.phone will revovery" and can't do anything(Flash)

sometimes(every 1/15) sonyericsson logo shows but quickly restart and white screen shows again but usually(every 14 from 15) white screen shows.but it's interesting for me that when i restored GDFS see this error again:(Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K810) in XS++.

Had it been crossflashed to K810i firmware before the GDFS backup was done? Having the phone identified in the GDFS as being a K810 is at least possible - every time I've seen that "k700" it's been some sort of GDFS error (well, unless the phone really IS a K700 :o )

[Surpriser]

Hi.i backup gdfs after flashing to k810 and havnt a gdfs backup from original frimware

[trimesh]

Well, that explains that message - when you do the initial startup and customise.xml runs it sets up some GDFS variables, so you are seeing the values from the K810 firmware.

All I can suggest is to try reflashing MAIN, FS and the custom pack (using the original K800 firmware) and see if that works - I presume the GDFS backup was made at a point when the phone was working correctly?

If you can't get it to flash, try another file, on the chance that the firmware package is corrupted...

[Surpriser]

yes i backup GDFS when phone working correctly(But after flashing to K810).i reflash K800 Frimware with XS++ and after reconnect phone :

21:28:53| TURN OFF PHONE!
21:28:53| Hold 'C' button on phone and connect phone NOW.
21:28:53| You have 30 seconds...
21:28:53|
21:28:59| Baseband ID: 9900
21:28:59| Protocol Version: 3.1
21:28:59| Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
21:28:59| ...using IMEI name
21:28:59|
21:28:59| Profiling SEMC phone...
21:28:59| Platform: DB2020
21:28:59| OTP CID: 49
21:28:59| EROM CID: 52
21:28:59| EROM Color: Red
21:28:59| IMEI: 35399601xxxxxx
21:28:59| Phone ID: K800
21:28:59| Region: M_EAST_N_AFR
21:28:59| CDA: CDA102568/6 R4A
21:28:59| Firmware Version: R8BA024
21:28:59| EROM: R3A016
21:28:59| Ready for operation!

i use K800 R8BF003 nut XS shows R8BA024!!!

after flash with XS Setool Indentify Log :

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3539960149xxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:K700
MAPP CXC article: R8BF003 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:M_EAST_N_AFR
CDA article: CDA102568/6
CDA version: R4A
Default article: cxc1250813
Default version: R8BA024

Operator: 000-00

Elapsed:5 secs.


i try to Reflash with Setool (after reflsh with XS and header accepted and dont show "Phone need recovery") and flashed the Main abd FS but when try to flash Custom Pack :

CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
chdir: 2
Directory not found, attempt to create
mkdir: 6
Break.
Elapsed:388 secs.

but i checked the directory and its correct!

and now when reconnect phone to setool ReSee this error:

Abort all operations.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:7 secs.

[philzfog]

Abort all operations.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:7 secs.

check battry if u have no joy with fixing it today add me to msn and i will help u fix it when i fin work

[Surpriser]

hi people! i changed the CPU and all problems fixed! and now phone working correctly! but now have a another problem.when i connect my phone to setool give this error:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
erom_readvar: error reading unit 1/851
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
Can't load ID loader !
Elapsed:4 secs.

i check buttery , cable and its correct! i flash it with PhoneXS+ and flashed successfully but setool show this error again! what i can do?

[Surpriser]

Please help me!!!

[philzfog]

is the phone fully working if so clean the fast port wear u plug ur usb in and allso try a diffrent usb lead it maybe faulty