Died K800i

[Surpriser]

yes i backup GDFS when phone working correctly(But after flashing to K810).i reflash K800 Frimware with XS++ and after reconnect phone :

21:28:53| TURN OFF PHONE!
21:28:53| Hold 'C' button on phone and connect phone NOW.
21:28:53| You have 30 seconds...
21:28:53|
21:28:59| Baseband ID: 9900
21:28:59| Protocol Version: 3.1
21:28:59| Warning: IMEI name does not match GDFS name (IMEI:K800 GDFS:K700)
21:28:59| ...using IMEI name
21:28:59|
21:28:59| Profiling SEMC phone...
21:28:59| Platform: DB2020
21:28:59| OTP CID: 49
21:28:59| EROM CID: 52
21:28:59| EROM Color: Red
21:28:59| IMEI: 35399601xxxxxx
21:28:59| Phone ID: K800
21:28:59| Region: M_EAST_N_AFR
21:28:59| CDA: CDA102568/6 R4A
21:28:59| Firmware Version: R8BA024
21:28:59| EROM: R3A016
21:28:59| Ready for operation!

i use K800 R8BF003 nut XS shows R8BA024!!!

after flash with XS Setool Indentify Log :

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3539960149xxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:K700
MAPP CXC article: R8BF003 prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:M_EAST_N_AFR
CDA article: CDA102568/6
CDA version: R4A
Default article: cxc1250813
Default version: R8BA024

Operator: 000-00

Elapsed:5 secs.


i try to Reflash with Setool (after reflsh with XS and header accepted and dont show "Phone need recovery") and flashed the Main abd FS but when try to flash Custom Pack :

CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
loader GDFS startup: executed
Writing package...
chdir: 2
Directory not found, attempt to create
mkdir: 6
Break.
Elapsed:388 secs.

but i checked the directory and its correct!

and now when reconnect phone to setool ReSee this error:

Abort all operations.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:7 secs.