K610 debrand. help please

[genteallia]

I have a k610 which is a "3" brand. i want to debrand it but i'm not sure which files to use and how to properly debrand without making any mistakes. could anyone please help me?

here's the phone info:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901838683 CERT:N/A
FLASH CID:49 COLOR:RED

Model:K610i
Brand:3
MAPP CXC article: R1CD001 prgCXC1250539_HUTCHISON_TH
MAPP CXC version: R1CD001
Language Package:HUTCH_1
CDA article: CDA102497/93
CDA version: R8A
Default article: cxc1250376
Default version: R1CD001

Network LOCKED
Operator: MULTIPLE

Elapsed:6 secs.

[philzfog]

use a gernic main fs custom pack or eruope 2

[genteallia]

does it matter if the firmware isn't R1CD001?
or do you mean i just have to change the custpack?

[philzfog]

nope it doesnt matter but u do need to use cid 49 and u do have to do a full reflash not just caustom pack

[genteallia]

ok thanks a lot i'll try right now


the flash was successful but now it says insert correct simcard. how do i fix that?

[philzfog]

u will have to patch unlock it loads off tuts on hear it easy

[genteallia]

i tried twice but can't apply the quick access patch
here's the log

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901838683 CERT:N/A
FLASH CID:52 COLOR:RED

Model:K610i
Brand:Sony Ericsson
MAPP CXC article: R1JG001 prgCXC1250374_GENERIC_TH
MAPP CXC version: R1JG001
Language Package:EUROPE_2
CDA article: CDA102568/11
CDA version: R5A
Default article: cxc1250376
Default version: R1JG001

Network LOCKED
Operator: MULTIPLE

Elapsed:7 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:3 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901838683 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
BOOTROM MODE DETECTED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170901838683 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:385 secs.

[philzfog]

u have the patch and main added to se tool and which one u useing v 1.11

[genteallia]

yea i'm using v1.11
i just upgraded the cid to 52 and flashed it with "K610_R1JG001_MAIN_GENERIC_TH_RED52" with the fs and custpack. then i made the quick access patch with qamaker and i did exactly as i should : i added the patch and the MAIN and pressed flash and everything and all goes well until :
"Trying to launch embedded bootloader...
embedded flashloader not responds !"

[genteallia]

i'm finally done with the phone i had to use setool 1.10 but i managed to unsimlock my phone. thank youvery much for your help. cheers