Flashin problems..did i kill my phone?

[visionaryj]

This site has been very helpful! However, I am running into some major problems.
I flashed my phone and everything seemed fine, but I received the "Configuration error" message after inserting my sim.
I have CID 52 firmware, so I don't know what's going on wrong.

I think this may be the problem: I first flashed from another site..and that didn't work so I flashed my phone using the files from this site.
Here's the previous site..
How to debrand a w580i

I wasn't sure if flashing more than once was a good idea.

Anyway.. here's what happened in my last attempt:

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102568/7
MODEL:HB1-06 Gen
VARIANT:C_ASIA
LANGUAGE: EN
LANGUAGE: AR
LANGUAGE: AZ
LANGUAGE: RU
LANGUAGE: TR
LANGUAGE: UK

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200140889 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Users\Elaine\Desktop\Extracted_Files\W580_R8BA0 24_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\Users\Elaine\Desktop\Extracted_Files\W580_R8BA0 24_FS_C_ASIA_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4420
Will flash 221 blocks...
SSW loading returns:0
ldr_on_ldr hdr no ack,err:10
CSloader uploading failed,exiting
Elapsed:354 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:306 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200140889 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Users\Elaine\Desktop\Extracted_Files\W580_R8BA0 24_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Can't get packet properties.
verify block error
last blk:44590000,00010000
Elapsed:291 secs.


It won't turn on anymore! I think it's dead...
Can you let me know what I can do to mend this?
I wasn't receiving fatal messages until I flashed it again. I could really use the help. Thanks in advance! arghhh

[philzfog]

looks like a flat battry retry with a full battry
Configuration error just means u havent flashed a custom pack to it do that will solve it 100% for Configuration error problem

[visionaryj]

HOLY COW. a miracle, i thought it was gone!
so i left it untouched for a day
and i have it plugged in to charge... i finally get a red light indicating the charge! but it stopped the red light thing... hmm
it wasn't doing that before... hopefully this works. i'll update!

[visionaryj]

it still won't connect to the computer, nor turn on.... is there anything else i could try?