major problem!!!!!!

[chingy]

hi guys I have a major problem!!!!!!!
please help me!!!!

I decided to patch my phone a z550i
so after trying setool lite
and not succeding....

tried gslide 1.6
set the correct flash header DB2010 red 49 344 blocks
followed all instructions carfully

flashed (modded) main file with xss++ and here is the log:

17:02:48| XS++ v3.2 Dev1 (Crystal) Ready !
17:02:48| Executed on Microsoft Windows XP
17:02:54|
17:02:54| Attempting to open the interface...
17:02:54|
17:02:54| TURN OFF PHONE!
17:02:54| Hold 'C' button on phone and connect phone NOW.
17:02:54| You have 30 seconds...
17:02:54|
17:03:02| Baseband ID: 8040
17:03:02| Protocol Version: 3.1
17:03:02|
17:03:02| Sending db2010_cid00_prodid_p3l.bin...
17:03:02| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:03:02| This is a PRODUCTION_ID loader
17:03:02| Activating GDFS...
17:03:03| Phone name detected!
17:03:03|
17:03:03| Profiling SEMC phone...
17:03:03| Platform: DB2010
17:03:03| OTP CID: 49
17:03:03| EROM CID: 49
17:03:03| EROM Color: Red
17:03:03| IMEI: 35494301xxxxxx
17:03:03| Phone ID: Z550
17:03:03| Region: S_ASIA_LEVAN
17:03:03| CDA: CDA102577/11 R3A
17:03:03| Firmware Version: R6BA033
17:03:03| EROM: n/a
17:03:03| Ready for operation!
17:03:32|
17:03:32| Sending db2010_cid49red_flash_r2a003.bin...
17:03:32| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
17:03:32| This is a FLASH loader
17:03:32| Now flashing firmware main...
17:03:32| Flashing c:\documents and settings\eg\desktop\new main file\flashmain.bin
17:03:32| Header type: BABE
17:03:32| 344 flashblocks
17:06:14| Finishing flash
17:45:55| Error: Flashing failed
17:45:55| Disconnected... Unplug the phone

started hanging on: sending flashblock 344/344 address=456522A1 size =00000098
look at the last 2 entries I waited over half an hour until I clicked on stop


now phone wont start,not deteced with xss++

where to start with fixing this MAJOR problem?
I have a spare battery in another phone, and I have latest GDFS backup

PLEASE help ME!!!!!!!!!!!
I'm desperate....

does you phone blink a red LED light by the power button or the infra red button when it try to turn it on? if it does, it could be a erom problem.
Cant really see what you flash to your phone cause i havnt read through your entire log, but i have feeling you flashed it with the wrong firmware.
it should be repairable thoguh.

try doing full flash XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums
and also repair the erom Upgrading or repairing the EROM (FOTA) in phones CID 49 or CID 51 with Phone XS - Top Sony Forums