w880i won't turn on

[CTBC]

------------------------------------------------
Update:

I have tried to use FAR + JDFlasher plugin, I managed to flash the phone. Once completed I unplugged the phone then loaded up JDFlasher to add the custom packs. Once connected the phone and clicked on 'ofs' I received an error: SetDirectory(setdir(setmode(doscript(qhldr(header not accepted))))) I have tried to reflash the phone again, but I get the same message when clicking 'oflash'.

-----------------------------------------------
My W880i won't turn on, and has a blinking red light under the c button. I have found out that this is most probably due to a EROM corruption.

The details of the phone is: (using XS++)

19:03:22| Baseband ID: 9900
19:03:22| Protocol Version: 3.1
19:03:22| Phone name detected!
19:03:22|
19:03:22| Profiling SEMC phone...
19:03:22| Platform: DB2020
19:03:22| OTP CID: 51
19:03:22| EROM CID: 53
19:03:22| EROM Color: Red
19:03:22| IMEI: xxxxxxxxxxxxxxx
19:03:22| Phone ID: W880
19:03:22| Region: ORANGE_GEN
19:03:22| CDA: CDA102719/78 R11A
19:03:22| Firmware Version: R1KG001
19:03:22| EROM: R3A016

I have tried to reflash the EROM using XS++ but I get a message:

19:07:34| Sorry, your phone is NOT SUPPORTED
19:07:34| Error: Cannot send flash loader
19:07:34| Error: Flashing failed
19:07:36| Disconnected... Unplug the phone

I do not know what to do, also I cant find many .fbn files, I currently have a "W880_R8BA024_FS_RUSSIA_RED53.fbn". But I need a english one really. Could someone give me a detailed guide to how to update the EROM as I do not understand much about this, and where to get a FBN file from.

[philzfog]

xs doesnt surport cid 53 phones at the moement
19:03:22| EROM CID: 53
to to use seus see if that helps

[CTBC]

I have tried that program so many times, half the time it says update fails at 0% but occasionally it works for a bit, but then says update fails around 95%.

[philzfog]

whats the charge like in ur battry

[CTBC]

It is full, well I think so, as I left it on charge for about 3 hours. But i cant see the screen to be 100% sure.

[CTBC]

I have tried to use FAR + JDFlasher plugin, I managed to flash the phone. Once completed I unplugged the phone then loaded up JDFlasher to add the custom packs. Once connected the phone and clicked on 'ofs' I received an error: SetDirectory(setdir(setmode(doscript(qhldr(header not accepted))))) I have tried to reflash the phone again, but I get the same message when clicking 'oflash'.

Please help!

[jay9881]

I think you cann't use XS++ for upgrading to CID 53, it's not supported at the moment, you may try using other program.

I used total multiserver, it works.

[ojay]

Phone name detected!
you have used wrong script maybe
u have to take "db2020" script... !?

[CTBC]

I used the db2020 script, ive looked in the db2020 script file and i can see the cid53 red header, so thats not the problem.

[SeaMonkey]

Try this way plz help... k810 is dead what can i do ? - Top Sony Forums , but instead XS++ you use jdflasher and first upload CUSTOM and than MAIN