Hello ladies and gentelmen. Can someone help me with my issue please...... Well I tried to flash my phone because it had the white screen of death and now the phone don't even turn on. So i tried to flash it and the following appeared...
Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
file can't be found or opened
Elapsed:0 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:7 secs.
file can't be found or opened
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
Model:K810i
MAPP CXC article: R8BA024 prgCXC1250903_HONG_KONG_SM
MAPP CXC version: R8BA024
Language Package:TELEF_GEN
CDA article: CDA102779/37
CDA version: R9A
Default article: cxc1250813
Default version: R1KG001
Operator: 000-00
Elapsed:4 secs.
file can't be found or opened
Elapsed:0 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.:eek:
Elapsed:14 secs.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:34 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxCERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
stated number of vars:1330
Found:469 variables
Found:797 variables
Found:64 variables
GDFS read all done, GDFS_35612701287814.BIN written
Phone detached
Elapsed:77 secs.
Elapsed:0 secs.
Elapsed:0 secs.
Elapsed:0 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.
CDA:CDA102568/106
MODEL:HB1-06 Gen
VARIANT:AMERICA_1
LANGUAGE: EN
LANGUAGE: CF
LANGUAGE: XL
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:8 secs.
Please someone help me! :(
Well thank you guys for spending time reading this::o
Also can someone help in how to use the recovery option in the SETool? I don;t know what file to put in or where to get it.
Thanks again :)
Results 1 to 4 of 4
Thread: Help with k810i Dead
-
04-17-2009 #1Recently Initiate
- Join Date
- Jan 2009
- Device
- -
- Posts
- 5
- Thanks
- 1
- Thanked 0 Times in 0 Posts
Help with k810i Dead
Last edited by infrit_10; 04-17-2009 at 01:12 AM.
04-17-2009 #2Recently Initiate
- Join Date
- Dec 2008
- Device
- -
- Posts
- 1
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Re: Help with k810i Dead :(
this is my first post on topsony. sorry i cannot help with your dead k810 for i have the same problem, but a little different or maybe not.
i have a k810 dead and tried both setool2lite and xs++ 3.1 darwin. cannot read phone with usb cable, instead i used cruiser cable and it reads the phone info fine. i cannot flash fone. i flashed erom with setool2lite and gdfs with xs++ 3.1 but nothing happens.
this is my setool2lite 1.11 log:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
Will backup GDFS now.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
loader prologue returns invalid status
phone pre-boot failed,possible RECOVERY needed.
Elapsed:9 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401262693 CERT:N/A
FLASH CID:52 COLOR:RED
ldr_on_ldr payload error (00)
Elapsed:40 secs.
this is my xs++ 3.1 log:
09:51:43| XS++ v3.1 (Darwin) Ready !
09:51:43| Executed on Microsoft Windows XP
09:51:48|
09:51:48| Attempting to open the interface...
09:51:51| Baseband ID: 9900
09:51:51| Protocol Version: 3.1
09:51:52| Speed set to 921600
09:51:52|
09:51:52| Sending db2020_cid01_prodid_p3j.bin...
09:51:53| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
09:51:53| This is a PRODUCTION_ID loader
09:51:53| Activating GDFS...
09:51:54| Phone name detected!
09:51:54| Restarting phone - please wait...
09:52:00| Baseband ID: 9900
09:52:00| Protocol Version: 3.1
09:52:01| Speed set to 921600
09:52:01| Phone has restarted successfully...
09:52:01|
09:52:01| Profiling SEMC phone...
09:52:01| Platform: DB2020
09:52:01| OTP CID: 51
09:52:01| EROM CID: 52
09:52:01| EROM Color: Red
09:52:01| IMEI: 35799401xxxxxx
09:52:01| Phone ID: K810
09:52:01| Region: S_ASIA_LEVAN
09:52:01| CDA: CDA102568/8 R7A
09:52:01| Firmware Version: R8BA024
09:52:01| EROM: n/a
09:52:01| Ready for operation!
09:52:25|
09:52:25| Sending db2020_cid01_prodid_p3j.bin...
09:52:26| Payload: Failed
09:52:26| Sending PRODUCTION_ID LOADER
09:52:26|
09:52:26| Sending db2020_cid01_prodid_r3a.bin...
09:52:35| Error: Flashing failed
09:52:35| Disconnected... Unplug the phone
09:52:40| Shutting down...
i am thinking of replacing the flash ic. will this work? another question how difficult is it to replace flash ic?
i hope there is someone to answer my request.
04-20-2009 #3Recently Initiate
- Join Date
- Jan 2009
- Device
- -
- Posts
- 5
- Thanks
- 1
- Thanked 0 Times in 0 Posts
Re: Help with k810i Dead :(
Have you tried to flash it pressing 2 and 5? try it with the usb presing those and maybe the computer will recognize it.
04-22-2009 #4Top Team Gold
- Join Date
- Jul 2008
- Device
- K750i - K810i - XPERIA arc - XPERIA tipo dual - Xperia Z Ultra
- Posts
- 2,314
- Thanks
- 21
- Thanked 282 Times in 271 Posts
Re: Help with k810i Dead :(
check the fastport for dirt presence, clean it
Originally Posted by donahue171
Reply With Quote
