Results 1 to 4 of 4

Hybrid View

  1. #1
    Recently Initiate
    Join Date
    Dec 2008
    Device
    -
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Help with k810i Dead :(

    this is my first post on topsony. sorry i cannot help with your dead k810 for i have the same problem, but a little different or maybe not.

    i have a k810 dead and tried both setool2lite and xs++ 3.1 darwin. cannot read phone with usb cable, instead i used cruiser cable and it reads the phone info fine. i cannot flash fone. i flashed erom with setool2lite and gdfs with xs++ 3.1 but nothing happens.
    this is my setool2lite 1.11 log:
    Welcome to SEtool2 ( LITE edition ) v 1.11
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit http://www.setool.net and buy FULL.

    Will backup GDFS now.
    Open COM port OK
    ChipID:9900,EMP protocol:0301
    Speed:921600
    loader prologue returns invalid status
    phone pre-boot failed,possible RECOVERY needed.
    Elapsed:9 secs.
    Open COM port OK
    ChipID:9900,EMP protocol:0301
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401262693 CERT:N/A
    FLASH CID:52 COLOR:RED
    ldr_on_ldr payload error (00)
    Elapsed:40 secs.

    this is my xs++ 3.1 log:
    09:51:43| XS++ v3.1 (Darwin) Ready !

    09:51:43| Executed on Microsoft Windows XP

    09:51:48|

    09:51:48| Attempting to open the interface...

    09:51:51| Baseband ID: 9900

    09:51:51| Protocol Version: 3.1

    09:51:52| Speed set to 921600

    09:51:52|

    09:51:52| Sending db2020_cid01_prodid_p3j.bin...

    09:51:53| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

    09:51:53| This is a PRODUCTION_ID loader

    09:51:53| Activating GDFS...

    09:51:54| Phone name detected!

    09:51:54| Restarting phone - please wait...

    09:52:00| Baseband ID: 9900

    09:52:00| Protocol Version: 3.1

    09:52:01| Speed set to 921600

    09:52:01| Phone has restarted successfully...

    09:52:01|

    09:52:01| Profiling SEMC phone...

    09:52:01| Platform: DB2020

    09:52:01| OTP CID: 51

    09:52:01| EROM CID: 52

    09:52:01| EROM Color: Red

    09:52:01| IMEI: 35799401xxxxxx

    09:52:01| Phone ID: K810

    09:52:01| Region: S_ASIA_LEVAN

    09:52:01| CDA: CDA102568/8 R7A

    09:52:01| Firmware Version: R8BA024

    09:52:01| EROM: n/a

    09:52:01| Ready for operation!

    09:52:25|

    09:52:25| Sending db2020_cid01_prodid_p3j.bin...

    09:52:26| Payload: Failed

    09:52:26| Sending PRODUCTION_ID LOADER

    09:52:26|

    09:52:26| Sending db2020_cid01_prodid_r3a.bin...

    09:52:35| Error: Flashing failed

    09:52:35| Disconnected... Unplug the phone

    09:52:40| Shutting down...

    i am thinking of replacing the flash ic. will this work? another question how difficult is it to replace flash ic?
    i hope there is someone to answer my request.

  2. #2
    Recently Initiate infrit_10's Avatar
    Join Date
    Jan 2009
    Device
    -
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Re: Help with k810i Dead :(

    Have you tried to flash it pressing 2 and 5? try it with the usb presing those and maybe the computer will recognize it.

  3. #3
    Top Team Gold riders4sia's Avatar
    Join Date
    Jul 2008
    Device
    K750i - K810i - XPERIA arc - XPERIA tipo dual - Xperia Z Ultra
    Posts
    2,314
    Thanks
    21
    Thanked 282 Times in 271 Posts

    Re: Help with k810i Dead :(

    Quote Originally Posted by donahue171 View Post
    this is my first post on topsony. sorry i cannot help with your dead k810 for i have the same problem, but a little different or maybe not.

    i have a k810 dead and tried both setool2lite and xs++ 3.1 darwin. cannot read phone with usb cable, instead i used cruiser cable and it reads the phone info fine. i cannot flash fone. i flashed erom with setool2lite and gdfs with xs++ 3.1 but nothing happens.
    this is my setool2lite 1.11 log:
    Welcome to SEtool2 ( LITE edition ) v 1.11
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit http://www.setool.net and buy FULL.

    Will backup GDFS now.
    Open COM port OK
    ChipID:9900,EMP protocol:0301
    Speed:921600
    loader prologue returns invalid status
    phone pre-boot failed,possible RECOVERY needed.
    Elapsed:9 secs.
    Open COM port OK
    ChipID:9900,EMP protocol:0301
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35799401262693 CERT:N/A
    FLASH CID:52 COLOR:RED
    ldr_on_ldr payload error (00)
    Elapsed:40 secs.

    this is my xs++ 3.1 log:
    09:51:43| XS++ v3.1 (Darwin) Ready !

    09:51:43| Executed on Microsoft Windows XP

    09:51:48|

    09:51:48| Attempting to open the interface...

    09:51:51| Baseband ID: 9900

    09:51:51| Protocol Version: 3.1

    09:51:52| Speed set to 921600

    09:51:52|

    09:51:52| Sending db2020_cid01_prodid_p3j.bin...

    09:51:53| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

    09:51:53| This is a PRODUCTION_ID loader

    09:51:53| Activating GDFS...

    09:51:54| Phone name detected!

    09:51:54| Restarting phone - please wait...

    09:52:00| Baseband ID: 9900

    09:52:00| Protocol Version: 3.1

    09:52:01| Speed set to 921600

    09:52:01| Phone has restarted successfully...

    09:52:01|

    09:52:01| Profiling SEMC phone...

    09:52:01| Platform: DB2020

    09:52:01| OTP CID: 51

    09:52:01| EROM CID: 52

    09:52:01| EROM Color: Red

    09:52:01| IMEI: 35799401xxxxxx

    09:52:01| Phone ID: K810

    09:52:01| Region: S_ASIA_LEVAN

    09:52:01| CDA: CDA102568/8 R7A

    09:52:01| Firmware Version: R8BA024

    09:52:01| EROM: n/a

    09:52:01| Ready for operation!

    09:52:25|

    09:52:25| Sending db2020_cid01_prodid_p3j.bin...

    09:52:26| Payload: Failed

    09:52:26| Sending PRODUCTION_ID LOADER

    09:52:26|

    09:52:26| Sending db2020_cid01_prodid_r3a.bin...

    09:52:35| Error: Flashing failed

    09:52:35| Disconnected... Unplug the phone

    09:52:40| Shutting down...

    i am thinking of replacing the flash ic. will this work? another question how difficult is it to replace flash ic?
    i hope there is someone to answer my request.
    check the fastport for dirt presence, clean it

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •