Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Hybrid View

  1. #1
    Recently Initiate
    Join Date
    Mar 2009
    Device
    -
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    W580 after flashing is not working

    I was flashing my phone to be able to unlocked but without success. I used the generic main file then the FS americas 1 but then I start having issues with IMEI and the GDFS without being able to recover. I decided to download the GFDS and installed. Now the phone won't even turn on. Is only flasing a red led inside and no signals of life. It there any way to recover it.

    22:47:45| Baseband ID: 9900

    22:47:45| Protocol Version: 3.1

    22:47:46| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)

    22:47:46| ...using GDFS name

    22:47:46|

    22:47:46| Profiling SEMC phone...

    22:47:46| Platform: DB2020

    22:47:46| OTP CID: 51

    22:47:46| EROM CID: 52

    22:47:46| EROM Color: Red

    22:47:46| IMEI: 01157200xxxxxx

    22:47:46| Phone ID: W580

    22:47:46| Region: CINGULAR

    22:47:46| CDA: CDA102774/102 R25A

    22:47:46| Firmware Version: R8BE001

    22:47:46| EROM: R3A022

    22:47:46| Ready for operation!

    THanks
    Last edited by lpilar97; 03-25-2009 at 08:26 PM.

  2. #2
    Recently Initiate
    Join Date
    Jan 2009
    Device
    -
    Posts
    8
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Re: W580 after flashing is not working

    did you create a gdfs back-up of the phone??? or you just download a gdfs from internet?.. if you installed a wrong gdfs, sorry to say that your phone is already dead.. i think the erom of your phone is damage... you need to repair it,, i suggest you to use wotanserver or kulankendi... just search it on the internet...

  3. #3
    Recently Initiate
    Join Date
    Mar 2009
    Device
    -
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: W580 after flashing is not working

    Thanks, it was damaged after I did the first flashing and it was giving me a lot of error. I tried to used my back up but without success. In my last attempt to recovered the phone, I dowloaded a w580 gdfs with blank info but dies after that. I will see if I my use the wotanserver.

    Thanks again

  4. #4
    Gold philzfog's Avatar
    Join Date
    Sep 2008
    Device
    -c905
    Posts
    1,628
    Thanks
    0
    Thanked 283 Times in 273 Posts

    Re: W580 after flashing is not working

    did u right a diffrent gdfs to it ? if so ur phones dead for now but it can be fixed show me a read out from se tool lite please

  5. #5
    Recently Initiate
    Join Date
    Mar 2009
    Device
    -
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: W580 after flashing is not working

    if I tried to unlock/repair and reading GDFS this is the message that appeared by holding 2&5 since if I touch c it will flash the red light immediately:


    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200437535 CERT:N/A
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    loader startup: executed
    loader GDFS startup: executed
    smth wrong with usercode reset,error is: 1
    Elapsed:73 secs.
    Will backup GDFS now.
    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200437535 CERT:N/A
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    loader startup: executed
    loader GDFS startup: executed
    stated number of vars:1293
    Found:1030 variables
    Found:263 variables
    GDFS read all done, GDFS_01157200437535.BIN written
    Phone detached
    Elapsed:80 secs.

    Regards

  6. #6
    Gold philzfog's Avatar
    Join Date
    Sep 2008
    Device
    -c905
    Posts
    1,628
    Thanks
    0
    Thanked 283 Times in 273 Posts

    Re: W580 after flashing is not working

    smth wrong with usercode reset,error is: 1
    means u have a diffrent gdfs on the phone
    and the unlock repare button is for se tool box users
    do u have a gdfs back at all from that phone

  7. #7
    Recently Initiate
    Join Date
    Mar 2009
    Device
    -
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: W580 after flashing is not working

    Yes indeed I have it but it does not let me installed it. Did you have or know about another software that may force the reprograming

    THe mistake that I make was that when I was having the configuration error message whenever I boot the phone with the SIm card, I read that GDFS was corrupted and in desperate attempt to recover the Phone I tried to installed another GDFS from another phone but exchanging the IMEI. SInce then the phone is locked and only activating the red flash.

  8. #8
    Gold philzfog's Avatar
    Join Date
    Sep 2008
    Device
    -c905
    Posts
    1,628
    Thanks
    0
    Thanked 283 Times in 273 Posts

    Re: W580 after flashing is not working

    u got configuration error becuse u didnt flash a custom pack to it that would off been so easy. if u have the gdfs back up and ur haveing truble righting it back use se tool light add the gdfs back uo to the mics box then press wright gdfs and concet ur phone by holding the 2 and 5 button not the c button this should solve it if not let us know

  9. #9
    Recently Initiate
    Join Date
    Mar 2009
    Device
    -
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: W580 after flashing is not working

    THat's I did and this is the message I got:

    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:01157200437535 CERT:N/A
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    loader startup: executed
    loader GDFS startup: executed
    Will write GDFS now.
    will write 538969343 variables
    gdfsWrite err:A,block:20,unit:2002
    Exception in GDFS write. maybe bad gdfs file.
    done
    Failed.
    Elapsed:76 secs.

  10. #10
    Recently Initiate
    Join Date
    Mar 2009
    Device
    -
    Posts
    13
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: W580 after flashing is not working

    Can is possible to reconstruct a GDFS in case my back up is also damage?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •