why is it so?

[poppyw610]

i flashed my w610 from r6 to r8. flash was succesful. my phone had new software .but whenever i connect my phone to xs++ it still says that firmware version is r6 i will show the log ?why is it so?:confused::confused:
12:35:45|

12:35:45| Attempting to open the interface...

12:35:45|

12:35:45| TURN OFF PHONE!

12:35:45| Hold 'C' button on phone and connect phone NOW.

12:35:45| You have 30 seconds...

12:35:45|

12:35:49| Baseband ID: 9900

12:35:49| Protocol Version: 3.1

12:35:49| Phone name detected!

12:35:49|

12:35:49| Profiling SEMC phone...

12:35:49| Platform: DB2020

12:35:49| OTP CID: 51

12:35:49| EROM CID: 52

12:35:49| EROM Color: Red

12:35:49| IMEI: 35489401xxxxxx

12:35:49| Phone ID: W610

12:35:49| Region: S_ASIA_LEVAN

12:35:49| CDA: CDA102763/62 R2A

12:35:49| Firmware Version: R6BC002

12:35:49| EROM: R3A022

12:35:49| Ready for operation!

12:36:07| ~~~~~~~~~~ Custpack information ~~~~~~~~~~

12:36:07| Custpack: AMERICA_2 (CDA102460/101) (K510)

12:36:07| Generic(non-branded) custpack: Yes

12:36:07| Allowed languages: en, pb, xl,

12:36:07| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

12:36:15|

12:36:15| Sending db2020_cid01_prodid_p3j.bin...

12:36:15| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

12:36:15| This is a PRODUCTION_ID loader

12:36:15|

12:36:15| Sending db2020_mem_patcher_cid52_r2a006.bin...

12:36:16| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

12:36:16| This is a MEM_PATCHER loader

12:36:16|

12:36:16| Sending db2020_cid52red_flash_r2a005.bin...

12:36:16| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

12:36:16| This is a FLASH loader

12:36:16| Now flashing firmware main...

12:36:17| Flashing e:\xs++ v3.1(darwin)\firmware\w610_r8ba024_main_generic_na _red52.mbn

12:36:17| Header type: BABE

12:36:17| 460 flashblocks

12:40:03| Finishing flash

12:40:03| Done flashing

12:40:03| Now flashing filesystem...

12:40:03| Flashing e:\xs++ v3.1(darwin)\firmware\w610_r8ba024_fs_cent_europe_ red52.fbn

12:40:03| Header type: BABE

12:40:03| 181 flashblocks

12:41:32| Finishing flash

12:41:33| Done flashing

12:41:33|

12:41:33| Sending db2020_red52_cs_r3a009.bin...

12:41:34| Applet ID: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009

12:41:34| This is a CHIPSELECT loader

12:41:34| Activating loader...

12:41:34| Activating GDFS...

12:41:55| This loader is UNLOCKED

12:41:55| Success! CS-loader has been unlocked!

12:41:55| Uploading customization files to phone...

12:41:55| Uploading /files_to_upload to phone...

12:41:55| Sending shutdown command to phone...

12:41:55| Customizing was SUCCESSFUL!

12:41:55| Disconnecting phone...

12:41:55| You may now unplug your phone.

12:41:55| Flashing was successful

12:41:57| Disconnected... Unplug the phone

12:44:08| Shutting down...
this was during flash
now after flashing

20:47:10| XS++ v3.1 (Darwin) Ready !

20:47:10| Executed on Microsoft Windows XP

20:47:14|

20:47:14| Attempting to open the interface...

20:47:14|

20:47:14| TURN OFF PHONE!

20:47:14| Hold 'C' button on phone and connect phone NOW.

20:47:14| You have 30 seconds...

20:47:14|

20:47:19| Baseband ID: 9900

20:47:19| Protocol Version: 3.1

20:47:20| Phone name detected!

20:47:20|

20:47:20| Profiling SEMC phone...

20:47:20| Platform: DB2020

20:47:20| OTP CID: 51

20:47:20| EROM CID: 52

20:47:20| EROM Color: Red

20:47:20| IMEI: 35489401xxxxxx

20:47:20| Phone ID: W610

20:47:20| Region: S_ASIA_LEVAN

20:47:20| CDA: CDA102763/62 R2A

20:47:20| Firmware Version: R6BC002

20:47:20| EROM: R3A022

20:47:20| Ready for operation!

:confused::confused::confused:

[riders4sia]

it happen on XS, i had this too when cross flashing K750-W800, use setool, it will show you the correct one