hey i know theres a ton of stuff on this model but ive tryed just about everything and have had no luck.

16:00:17| XS++ v3.1 (Darwin) Ready !
16:00:17| Executed on Microsoft Windows XP
16:00:23|
16:00:23| Attempting to open the interface...
16:00:23|
16:00:23| TURN OFF PHONE!
16:00:23| Hold 'C' button on phone and connect phone NOW.
16:00:23| You have 30 seconds...
16:00:23|
16:00:30| Baseband ID: 8040
16:00:30| Protocol Version: 3.1
16:00:30| NEW SECURITY PHONE DETECTED! SWITCHING...
16:00:30| Phone name detected!
16:00:30|
16:00:31| Profiling SEMC phone...
16:00:31| Platform: DB2010
16:00:31| OTP CID: 50
16:00:31| EROM CID: 50
16:00:31| EROM Color: Red
16:00:31| IMEI: 35657301xxxxxx
16:00:31| Phone ID: W810
16:00:31| Region: ROGERS
16:00:31| CDA: CDA102494/128 R6A
16:00:31| Firmware Version: R4ED001
16:00:31| EROM: n/a
16:00:31| Ready for operation!

I used Setool2lite latest version and flashed with this firmware:
W810_R4EA031_MAIN_GENERIC_HN_RED50
FS:
W810_R4ED001_FS_AMERICA_1_RED50

phone would not work and said contact provider on power up.

ive tryed pretty much every version of XS and for the most part they all give me this error when i try to flash.
16:04:55| Sending db2010_db2012_cid50red_flash_r1a002.bin...
16:04:56| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
16:04:56| This is a FLASH loader
16:04:56| Now flashing firmware main...
16:04:56| Flashing c:\documents and settings\ash.office-ef59ff3d\desktop\w810 stuff\w810_r4ea031_main_generic_hn_red50\w810_r4ea 031_main_generic_hn_red50.mbn
16:04:56| Header type: BABE
16:04:56| 344 flashblocks
16:04:58| Binary acknowledge failed with: 15
16:04:58| Command: Error 0x15
16:04:58| Failed sending flashblock 1. Returnvalue 0xFFFF250B
16:04:58| Finishing flash
ive already tryed writing a simunlock with setools and im pretty sure it wrote successfull cause when i go into the menu everything shows unlocked except the network.
i succefully did a w810 long time ago unfortunatley i cant remember how i did it.
any help would be greatly appreciated.
1 other question, if someone could point me in the direction of what the vpk pathes are ment for exactly.
Thank you in advance.