w880i dead

[meglug]

When I woke up this morning my w880i turned out to be dead (black screen, can't connect to charger or pc). I really don't want to return it to the store so you guys are my last chance. I've tried updating the version with SE official tool, but it didn't work one tiny bit, I've also tried to take the battery out and reinsetting it but that didn't help either.

Please help me ;)

By the way, I posted this another place but it didn't get any replys so I guess it was the wrong forum. If you need any other details please say so.

[JnCon]

Check battery
If batt o.k, try to switch on the phone. If red led is blinking you may have EROM error.

[philzfog]

down load se tool lite conect ur phone to it hold the 2 and * button on ur phone and post log up with out imei no so we can see

[meglug]

When I tried to switch on my phone it gave a quick red flash from the "C" button, I'll post log as soon as I have it. By the way philz, could you accept me on msn?

[philzfog]

i will as son as i get home frm work :) try to get a full battry as well

[meglug]

I had it in the charger last night and I haven't had any luck to turn it on so it should be fully charged.

[philzfog]

dead se phones wont let u charge the battry buddie not to worry at the moe have a read though this for now
SeTool2 Lite 1.11 - Top Sony Forums
and if u fell u have the hang off it try to get a read out holding the 2 and * button and post it up so we can tell u whats up :)

[meglug]

So I just open the program, select my model and press 2+*?

[philzfog]

press the ident button hold the 2 and * keys on ur phone and plug the usb cable in to ur phone u my have to down load the usb driver for it there are post in the main flashing giude her that u can download

[meglug]

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:************ CERT:N/A
phoneid error 1
Error during phone id.
Elapsed:48 secs.