dead k310i to w200 problems

[napsteur]

hi i really need your help brothers.
i had a k310i which was dead so i flashed the main and fs from download section with setool. but after flashing the phone doesn't wakeup so i tried to flash it with w200 files from here.and again no way.
i wrote my gdfs backup(from xs++) to phone...no way
wrote gdfs (from download section).......no way.
these r my logs of different attempts if somebody can help me:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:11 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:34 secs.


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:11 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:34 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3533xxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED

Model:K310i
Brand:Generic
MAPP CXC article: R4DA044 prgCXC1250466_GENERIC_DO
MAPP CXC version: R4DA044
Language Package:EUROPE_1
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1250474
Default version: R4DA044

Operator: 000-00

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:7 secs.
Elapsed:7 secs.



Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
Can't load ID loader !
Elapsed:11 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:34 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3533xxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED

Model:K310i
Brand:Generic
MAPP CXC article: R4DA044 prgCXC1250466_GENERIC_DO
MAPP CXC version: R4DA044
Language Package:EUROPE_1
CDA article: CDA102295/1
CDA version: R2A
Default article: cxc1250474
Default version: R4DA044

Operator: 000-00

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:7 secs.
Elapsed:7 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3533xxxxxxxxxx CERT:RED
phoneid error 1
Phone info read error !
Elapsed:6 secs.

[philzfog]

hi i really need your help brothers.
i had a k310i which was dead so i flashed .

was the phone dead b4 u started to do any flashing
good tip dont right any other gdfs that isnt from that phone u will kill it

[napsteur]

yes the phone was dead,there was a white blinking screen when i power on the phone.i didn't write any new gdfs,i just wrote the one i backed up.

ps:i'll add u to my msn since it's very urgent.thank u

[richardlou]

Exact same thing happened to my K310i when i tried to W200 it!
This is how i fixed it.
Try downloading"K310_RED_CID49_R3B010_EROM-FOTA" and write it to your dead K310i.
next "ReadGDFS", Then get a "blank K310 GDFS" and write it to your dead K310i. Now disconnect and remove\ refit battery but DONOT turn on.
Identify Phone, and then use "R4EA031 MAIN_GENERIC_DO_RED49.mbn" + "R4EA031FS_EUROPE_"_RED49.fbn" in main box, in "Firmware update box" put "R4EA031_SFA_EUROPE_2_RED49.sfa, and in "script box" put "CDA102570_127_R2A_GENERIC_TRADE_UNITED_KINGDO M"
Now Flash The Phone with these in place.
When Finished, Use "SimLock Patch Gen" and the "MAIN.mbn" used earlier and make a ".vkp" file.
Re connect phone with "read GDFS". Once connected put your ".vkp" file in "script" box and "Write Script".
Disconnect when finished, your phone SHOULD be BACK 2 LIFE, Unbranded, an unlocked.
Thats how i Revived mine. Hope it works for ya.