If i press C and put the cabble in my phone, XS++ say:
01:57:54| XS++ v3.2 Dev1 (Crystal) Ready !
01:57:54| Executed on Microsoft Windows XP
01:58:01|
01:58:01| Attempting to open the interface...
01:58:01|
01:58:01| TURN OFF PHONE!
01:58:01| Hold 'C' button on phone and connect phone NOW.
01:58:01| You have 30 seconds...
01:58:01|
01:58:10| Did not receive 0x5a. Continuing
If i press 2+5 and put the cabble in my phone, XS++ say:
02:01:01| XS++ v3.2 Dev1 (Crystal) Ready !
02:01:01| Executed on Microsoft Windows XP
02:01:06|
02:01:06| Attempting to open the interface...
02:01:06|
02:01:06| TURN OFF PHONE!
02:01:06| Hold 'C' button on phone and connect phone NOW.
02:01:06| You have 30 seconds...
02:01:06|
02:01:11| Baseband ID: 9900
02:01:11| Protocol Version: 3.1
If i press 2+5 and put the cabble in my phone, setool2lt say:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701804195 CERT:N/A
FLASH CID:52 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35612701899239
Model:K810i
Brand:movistar
MAPP CXC article: R1KG001 prgCXC1250811_GENERIC_SM
MAPP CXC version: R1KG001
Language Package:TELEF_GEN
CDA article: CDA102779/37
CDA version: R9A
Default article: cxc1250813
Default version: R1KG001
Network LOCKED
Operator: MULTIPLE
Elapsed:10 secs.
Elapsed:10 secs.
If i press 2+5 and put the cabble in my phone, setool2lt cannot get the connection!
MY PHONE ARE DEAD!!!
I try to press my phone on, but nothing happend?
My accu are good, cable are good, but i think my GDFS are wrong and I dont have backup from my old GDFS.
I like to get my phone to work and listen to music and using a camera.
My phone are blacklisted and i cannot ring or send txt. This is so stupid!