Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Hybrid View

  1. #1
    Recently Initiate
    Join Date
    Jan 2009
    Device
    -
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    k800i dead,red light blinking

    I've bought a k800i that looks very good but has a software problem and when I connect it to a computer the red light blinks ( I think it has a broken gdfs). I thought I could fixed it with setool2lite 1.11, but this is what happens when I connect it to the program by presing 2+5 ( because by holding c doesn't work):
    Welcome to SEtool2 ( LITE edition ) v 1.1
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit http://www.setool.net and buy FULL.

    Identify

    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    Flash ID check:2019
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801296262 CERT:N/A
    FLASH CID:52 COLOR:RED
    no ack during gdfs_readvar !
    Can't read SCRC unit
    Elapsed:84 secs.

    read gdfs

    Will backup GDFS now.
    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801296262 CERT:N/A
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:2019
    Flash props sent ok
    ldr_on_ldr hdr no ack (10)
    CSloader uploading failed,exiting
    Elapsed:5 secs.

    unlock/repair

    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    Flash ID check:2019
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801296262 CERT:N/A
    FLASH CID:52 COLOR:RED
    no ack during gdfs_readvar !
    Can't read SCRC unit
    Elapsed:83 secs.


    PLEASE HELP!!!!!!!

  2. #2
    Expert hyperion17's Avatar
    Join Date
    Mar 2008
    Device
    K800
    Posts
    987
    Thanks
    12
    Thanked 158 Times in 155 Posts

    Re: k800i dead,red light blinking

    "Can't read SCRC unit" means your GDFS is damaged or corrupted and you must repair it with setool box, or try this TUTORIAL.
    Last edited by hyperion17; 02-09-2009 at 03:05 PM.

  3. #3
    Gold philzfog's Avatar
    Join Date
    Sep 2008
    Device
    -c905
    Posts
    1,628
    Thanks
    0
    Thanked 283 Times in 273 Posts

    Re: k800i dead,red light blinking

    use a fully charged battry then reflash the main only

  4. #4
    Recently Initiate
    Join Date
    Jan 2009
    Device
    -
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: k800i dead,red light blinking

    i' ve reflash the main, but nothing happend

  5. #5
    Recently Initiate
    Join Date
    Feb 2009
    Device
    -
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: k800i dead,red light blinking

    red light blinking ,this mean you must repair it by se box or crusier

  6. #6
    Gold philzfog's Avatar
    Join Date
    Sep 2008
    Device
    -c905
    Posts
    1,628
    Thanks
    0
    Thanked 283 Times in 273 Posts

    Re: k800i dead,red light blinking

    ldr_on_ldr hdr no ack (10)
    normaly low battry
    but if it is full easy way to fix gdfs is with D-Ultimate Unlocker

  7. #7
    Expert hyperion17's Avatar
    Join Date
    Mar 2008
    Device
    K800
    Posts
    987
    Thanks
    12
    Thanked 158 Times in 155 Posts

    Re: k800i dead,red light blinking

    ldr_on_ldr hdr no ack (10) means the flash chip does not respond.
    @addier said it's a physical problem and you must heat the chip to 160 degrees.

  8. #8
    Member
    Join Date
    Nov 2008
    Device
    -
    Posts
    37
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Re: k800i dead,red light blinking

    I have the same problem and red light blinking.
    But now look at this
    Welcome to SEtool2 ( LITE edition ) v 1.11
    supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
    Loaded 51 flash descriptors

    if you like LITE edition - please visit http://www.setool.net and buy FULL.

    Will backup GDFS now.
    ChipID:9900,EMP protocol:0301
    BOOTROM MODE DETECTED
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:3517070xxxxxxx CERT:N/A
    FLASH CID:52 COLOR:RED
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:2019
    Flash props sent ok
    CSloader version:
    070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
    loader startup: executed
    CSloader refused to start GDFS services,error is:29
    failed, that is fatal
    Elapsed:8 secs.

    Code:
    Trying to launch embedded bootloader...
    INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R4EK001_CXC1250316_GENERIC_HN
    Restore from:R4EK001_CXC1250316_GENERIC_HN
    can't open file "C:\Documents and Settings\Admin\Escritorio\FINWARE W810\Setool Lite v1.11 Mi Sony Ericsson\rest\R4EK001_CXC1250316_GENERIC_HN"
    CSloader version:
    SETOOL2 LITE COMPACT_SEMC_FS_LOADER (FAT V26)
    loader startup: executed
    loader filesystem startup: executed
    CSloader refused to start GDFS services,error is:29
    loader GDFS startup failed, that is fatal
    Elapsed:51 secs.Solution: There is NO REST file or REST file is corrupted
    1. Go to make_rest folder on setool.
    2. Drag your Main (.mbn) over ssw2rest.exe, a file will be made.
    3. Cut and paste this file (WITHOUT CHANGING NAME) on the rest folder of setool.
    4. Flash MAIN and try again.
    P.S. I flashed it with Main few times, and one time FS+MAIN, nothing happened... blinking when I try to turn it on.
    Last edited by SilentMove; 02-11-2009 at 09:56 AM.

  9. #9
    Gold philzfog's Avatar
    Join Date
    Sep 2008
    Device
    -c905
    Posts
    1,628
    Thanks
    0
    Thanked 283 Times in 273 Posts

    Re: k800i dead,red light blinking

    CSloader refused to start GDFS services,error is:29
    failed, that is fatal
    can be one off 3 things flat battry , damged gdfs ,flash chip or ic needs to be rplaced

  10. #10
    Member
    Join Date
    Nov 2008
    Device
    -
    Posts
    37
    Thanks
    3
    Thanked 0 Times in 0 Posts

    Re: k800i dead,red light blinking

    I have 2 batteries (K800 flat, and Z800), flash chip where i can get it (maybe are any other SE Phones which have the same chip)?
    It's impossible to make GDFS Repair for free?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •