My SE w660i is dead

[W660 User]

after using the script and clicked No :


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Elapsed:0 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501266003 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing C:\setool2lite\make_rest\W660_R8BB001_MAIN_GENERIC _FY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:262 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501266003 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Owner\שולחן העבודה\SIMLockPatchGen\vkp\Remove_SIM_lock_W660_R8 BB001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:12 secs.

[philzfog]

did u tick the bypass box at the top of se tool
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes

[W660 User]

still error 000000000 bytes and phone locking fot my sim

[philzfog]

how many locks are on when u press <**<

[W660 User]

---------------------------
Information
---------------------------
Some patch values differs, continue ?
---------------------------
Yes No
---------------------------

what to cliock? it appered after i clicked no in the remove patch

MNC2
5 lock

[hyperion17]

Did you applied first "quick access patch"?

[W660 User]

when should i tick it?
when i load the script or what?

[riders4sia]

after using the script and clicked No :


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

Elapsed:0 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501266003 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing C:\setool2lite\make_rest\W660_R8BB001_MAIN_GENERIC _FY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:262 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35715501266003 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
Starting to process VKP patch script: C:\Documents and Settings\Owner\שולחן העבודה\SIMLockPatchGen\vkp\Remove_SIM_lock_W660_R8 BB001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Block @ $44740000 read error. Have only: 00000000 bytes
Elapsed:12 secs.

you did not apply quick access patch yet. read this tutorial and follow the step 3
Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums

[w830]

yes,quick access patch had been not applied.aplied it and patch it....

[wadis]

i have a dead w660i. it does not respond when you connect to the pc but with charger, there is current on the battery connector. i there any other way to make it respond