W200i Unlocking

[wi_lius]

I get this error when try to open bflash on my W200 CID 53. What's wrong?

[icex]

I get the same error as well :| stupid SE cid53 :mad: I followed your instructions but I get this error.

[DNK13]

i got the same error
i have k510@w200 cid 50 and i use the script from post 9
is there a way to make it work?

[philzfog]

what is the phone organaly is it a w200 ?

[DNK13]

what is the phone organaly is it a w200 ?

no is k510 but i flash into w200

does anyone have anycid script for w200 cid50
thanks

[selops]

Simox, I have a w200i DB2012 CID52 RGB001_MAIN_GENERIC_RED52.
I used your Remove SIM-lock patch generator v2.2 to generate the patch.
I created the REST file.
Then I ran Setool2lite v1.11 and tried to flash with the unlock patch using DCU-60 cable.

I got the following message which indicates failure to flash.
Can you tell me what does it mean ?

=========Setool2lite session log=========IDENTIFY
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:W200i
Brand:Optus
MAPP CXC article: R4GB001 prgCXC1250719_GENERIC_ME
MAPP CXC version: R4GB001
Language Package:EUROPE_2
CDA article: CDA102738/14
CDA version: R3A
Default article: cxc1250728
Default version: R4GB001

Network LOCKED
Operator: 505-02

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:14 secs.
===================FLASH with VKP file
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3561xxxxxxxxxx CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: D:\mobile\SIM-Lock Patch Generator\vkp\Remove_SIM_lock_W200_R4GB001_GENERIC .vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44CC0000
Blocks selected OK. Reading blocks: 1
Block @ $44CC0000 read error. Have only: 00000000 bytes
Elapsed:15 secs.
=========end of log=========

[jocoolguy1]

This website provides a complete knowledge base on mobile phone unlocking instructions and guides. It has unlocking instructions for more than 5000 mobile phone models.visit my site

[dilfred]

I must be honest, I am totally flummuxed by all this.
My phone is a w200 locked onto orange in the UK.
I've managed to get as far as running and getting this information, however am now 100% confused as to what to do next.
All I want to be able to do is put a different network card in there, I am not sure if I need to unlock/depatch/patch/debrand or what to be honest, but let's start with the main thing, how do I get the phone to work with all networks (or at least o2 instead...)

XS++ v3.2 Dev1 (Crystal) Ready !
Executed on Microsoft Windows XP
Attempting to open the interface...
TURN OFF PHONE!
Hold 'C' button on phone and connect phone NOW.
You have 30 seconds...
Baseband ID: 8040
Protocol Version: 3.1
NEW SECURITY PHONE DETECTED! SWITCHING...
Phone name detected!
Profiling SEMC phone...
Platform: DB2010
OTP CID: 51
EROM CID: 52
EROM Color: Red
IMEI: 35735401xxxxxx
Phone ID: W200
Region: ORANGE_GEN
CDA: CDA102738/71 R9A
Firmware Version: R4GB001
EROM: n/a
Ready for operation!

Sending db2010_db2012_cid52red_flash_r2b012.bin...
Shutting down...

That is all i've done so far, what do I do next, simple idiot steps ideally please :o)

Thank you all in advance for being gentle on my rather limited knowledge/understanding

[insane]

Hi,
I'm having some hassle unlocking a w200i can someone look at the log and tell me where i'm going wrong?

12:32:57| XS++ v3.1 (Darwin) Ready !
12:32:57| Executed on Microsoft Windows XP
12:33:04|
12:33:04| Attempting to open the interface...
12:33:04|
12:33:04| TURN OFF PHONE!
12:33:04| Hold 'C' button on phone and connect phone NOW.
12:33:04| You have 30 seconds...
12:33:04|
12:33:09| Baseband ID: 8040
12:33:09| Protocol Version: 3.1
12:33:09| NEW SECURITY PHONE DETECTED! SWITCHING...
12:33:09| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W200)
12:33:09| ...using GDFS name
12:33:09|
12:33:09| Profiling SEMC phone...
12:33:09| Platform: DB2010
12:33:09| OTP CID: 51
12:33:09| EROM CID: 53
12:33:09| EROM Color: Red
12:33:09| IMEI: 35575902xxxxxx
12:33:09| Phone ID: W200
12:33:09| Region: EUROPE_2
12:33:09| CDA: CDA102738/155 R1A
12:33:09| Firmware Version: R4JA011
12:33:09| EROM: n/a
12:33:09| Ready for operation!
12:33:34| Sorry, your phone is NOT SUPPORTED
12:33:34| Error: Cannot send flash loader
12:33:34| Error: Flashing failed
12:33:36| Disconnected... Unplug the phone

I would genuinely appreciate any help guys!

Insane.

[bambu_men]

jdflasher_test6.rar and jdflasher_test6_add1.rar link is dead. can someone upload it again. pliss..