Hi guys, thanks for your unswers, this is the guide you were talking about;
Any/ALL CID Patching Tutorial/Guide DB2020
This tutorial is for Patching db2020 Sony Ericsson phones and all CIDs. So you can now patch your CID53 phone with this guide. You can also use this method to patch CID49, CID51 and CID52 also. Thus you can unlock your phone with unlock patch if you want to do so.
This tutorial is written for new and intermediate users. Advanced users may find this tutorial a bit lengthy, because of the details.
You can find out your phone platform, if its db2020 or not from the SE-LifeStyle Phone Database. Select db2020 in the left column and it will show all db2020. Or else select All in Platform and Click on phone in the Right column, it will show information about your phone platform and also possible CIDs. Its a pretty easy to use tool.
Downloads
Install USB Flash Drivers( You must install usb flash drivers, if not already installed.)
JD Flasher (Updated for AnyCID). (The main tool)
All CIDs Patching Files. AnyCID.ZIP
Video Tutorial, Download.
Read the tutorial, and don’t forget to watch the video to learn ! If you have any problems discuss them at our support forum !
Part 1 : Preparations and Basic Setup.
Extract the AnyCID.ZIP. In your phone folder, you should find a zip file which contains executor.b !
As an example you can find the following zip file in w580 directory R8BE001_CXC1123362_GENERIC_LA !
Here RBBE001 indicates the main firmware version for which the executor.b works. So you better make sure you have a main firmware for which executor.b is available.
Download the main firmware .mbn from the Internet. You can easily search in esnips, 4shared or *******.com for firmwares.
Download Jdflasher, Extract it.
In the directory Far\Plugins\jdflasher\rest you will find mkrest2.exe.
This is the Make Rest Tool. Its used to create the Rest file for your firmware. Rest is short for ReStore.
Copy your main firmware, MBN to Rest Folder and drag and drop the main firmware file (.mbn file) onto mkrest2.exe !
It will create the rest file for your firmware. Keep a note of this file, The Rest file for your main firmware. We need this file later.
Now in jdlfasher\2020_52 folder you will find qamaker.exe, drag and drop your main firmware onto qamaker.exe. You will get the Quick Access Patch for your phone.
We continue with our example phone, Enter AnyCID\w580. Extract the zip file R8BE001_CXC1123362_GENERIC_LA to get tpa\preset\custom\executor.b !
And in the db2020.zip you will find executor.jar and customize_upgrade.xml ! These files are also needed.
Also in the AnyCID folder you will find a file qa2020.xml copy it to jdlfasher\scripts\**here**; Over write the old qa2020.xml with new one from Any CID.
Part 2: Flashing, Copy Breaking files to File System.
We now have to copy the 3 files executor.b, executor.jar, customize_upgrade.xml to tpa\prest\custom in the phone’s file system. This is pretty easy with Jdflasher.
Shutdown phone.
Re-Insert Battery.
Start Far.exe
Press ALT+F1
Select your db2020 in Script option, Select port as DCU-60, And select Maximum Speed 921600.
Also Uncheck the RSA option, this can cause problems.
Now Jump Down Into A Large Rabbit Hole. I mean Click that option ;-).
Jdflasher will initialize and you will will get few options on the left side. Right side is your computer’s file system.
Now Double Click OFS. Jdflasher will start the file system loader and finally you should enter the phone file system.
Enter tpa and then preset and then finally custom folder.
You should now be in tpa\preset\custom\ folder in the phone file system.
Now copy all the the 3 files to this folder, executor.b, executor.jar, customize_upgrade.xml
Copying is easy, on the right side in Far Manger navigate to plugins\jdflasher\AnyCID and then drag and drop the individual files to the Left Side to the phone in tpa\prest\custom\
Before leaving make sure that you have all the 3 files in the phone file system, i.e On the LEFT hand side in tpa\prest\custom\.
Its now time to exit from file system. To Exit you need to go back to the root. You should on double click ” . . “ until you reach root, then click one more, you will get a message in RED. Its the option to shutdown file system loader, so click OK. Basically it says you should re-insert battery.
Disconnect phone and re-insert battery and start phone.
Part 3: Installing Quick Access !
Go to Entertainment and then Games. Run the executor in games. Your phone will turn off.
Now Re-insert Battery. Don’t start the phone.
Start Far Manager.
In The Script option select script as qa2020 ! And Enter the Rabbit hole once more !
Enter bflash this time.
Naviate to rest folder in jdflasher. Its time to flash the Rest file.
Click on your Rest File.
Press F5 ok keyboard and then click copy, then in 2nd screen click flash. (Flash as a BABE).
Now Navigate to 2020_52 folder, click on your quick access patch, so that its selected.
Hit F5, click copy, hit flash ! It should be flashed as a VKP.
JDflasher will now flash the Quick Access VKP and Install it !
Exit bflash through ” . . ” option.
Start phone, navigate to games, Delete executor.
Quick Access has now been installed into your phone. Patching the phone now becomes very easy.
Part 4: Patching !
You can now apply any number of patches you want.
Shutdown phone. Re-Insert Battery.
Select qa2020 as script.
Start Jdflasher, jump in rabbit hole.
Enter bflash. Navigate to patch.
Select the patch, press F5 and then click copy and then click flash. Flash as a VKP.
Apply any number of patches in the session.
Exit bflash.
Dis-connect phone, Re-Insert Battery and Start phone.
Repeat Part 4 whenever you want to apply a patch.
Notes–
1. To unlock phone apply the unlock patch. Unlock patch can be generated using SIMOX tool with your main firmware mbn file.
2. If you re-flash main firmware, all patches are erased.
3. You may want to read the Jdflasher tutorial for help on flashing and customization.
Note for w610 and w660 users.
w610 R6BC002 has a lot of patches, but for R6BC002 there is no executor.b files. So flash your phone with R8BA024 Main and keep the R6BC002 FS. Then after flashing the rest file in part 3, flash the R6BC002 Main and then Flash the Quick Access patch. This way your phone will have R6BC002 Main, you can then use all R6BC002 patches.
Similarly w660 users should flash R8BE001 firmware, use the executor.b and break the main, then in part 3 after flashing REST file of R8BE001, flash the R8BB001 Main firmware, then apply quick access patch. This way you will have R8BB001 firmware. And R8BB001 has lots of patches and elves.
I have provided the video tutorial, so am not adding pictures. That’s cool enough.
Good Luck...:confused: