w880i not starts after aplying qa patch

[adshow]

my w880i did not starts after aply qa patch

then i reflash it full with xs++

it starts but locked to to orange uk

now i want to unloack it

every time i use setools2lite 1.11 to flash it to apply unlock patch its not starts after finshing

here r logs


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35464901XXXXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:3546490XXXXX CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\Naeem\My Documents\Downloads\setool2liteV1.11\setool2liteV1 .11\qamaker\quick_access_W880_R8BC004.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45CC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:799 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:40 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:35 secs.

[philzfog]

are u adding the right main and patch and ticking the bypassbox box? and no to add the patch ?

[adshow]

yes i added main firmware and its qa patch that i genrated by tool in setool 1.11 box

but after it finsh flashing phone no starts


then i reflash it with xs++ 3.1 with only firmware file then it starts

but my main problem is unlock my w880i cid 52 phone

files i use r


Main

W880_R8BC004_MAIN_GENERIC_AI_RED52.mbn
fs

W880_R8BC004_FS_EUROPE_4_RED52.fbn


my phone is locked to orange uk

i want to use it pakisitan

it was working two days ago then i update its main firmware

and now its locked

[simox]

I suggest you to try the whole unlocking procedure again, regenerate the patches using your current firmware, and follow one of unlocking guides carefully. It should work...

it was working two days ago then i update its main firmware

and now its locked

It is a normal behaviour. Every time you reflash the MAIN firmware, you need to apply the patches(for new firmware!!!) again.