Flashing/Patching 3 K530i with generic firmware

[TK31]

ah okay thanks... so if i run the patch program for W660 on a K530 firmware, it wont do anything rite?

[TK31]

umm im up to here:

7. Upload this 3 files(customize_upgrade,executor.jar and executor.b) in /tpa/preset/custom/ with jdflasher

i used the qa2020 script and connected.
Then i tried to enter bflash but i get an error:
SetDirectory(setdir(setmode(run(gethello(IOUsb::ge tblock(time exceed))))))

sorry for the double post.

[SeaMonkey]

No,at this point you need to use db2020 script and open ofs and browse to tpa/preset/custom

[TK31]

ah...

=S i get a "bad answer 10" when i try to access oFS with db2020 script.. any ideas?

This is the only thing stopping me from successfully flashing my phone =(

EDIT: I found out that its a problem with the bin file:
070904 1245 DB2020_CSLOADER_R3A013.2020_53_RED.
When it tries to do cmd3c using that file, it gets a bad reply...

does anyone know of an update?

[TK31]

sorry for the double post, but i just had to bump this....

I finally found out the answer for any person that gets a "Bad Answer".

The CID53 patch that comes in the new JDFlasher update, DOES NOT support your phone.
I realized this after looking at the Sony Ericsson Secret Menu lol (> * << * < *). If you go to the Software Info and take a look at your EROM, it'll say that you have a higher version than the R3A013 supported by the CID53 patch. Mine is a R3A022, meaning its unsupported at the moment, hence getting bad replies from jdflasher.

EDIT: So, back to the point, does this mean im stuck and i cant flash it?
Ill post XS++ info later.

[SeaMonkey]

Start from beggining and DON'T turn on phone until you upload executor and cust_upgrade

[TK31]

umm... so continue using the R3A013 script?

EDIT: okay no matter what i do, restart comp, do everything all over again,
i still get this screen: