w810i frustration

[aero]

Hey folks, im new here, and im hoping someone can help me with my phone. I tried to research first, but i winded up with more confusion as im not as technologically advanced as you kids are ( im 43 )

Well to explain, I have this so called "white screen of death" the flashing white screen that never seems to stop.

I read the basic things, let it flash for 30 mins if it doesnt fix itself then flashing is required. Soon after i stumbled upon wally dogs? tutorial on this wonderful forum, but i got more confused. It mentions debranding as a vital step. My phone is already debranded. It has been purchased from plemix.com already unlocked. So im utterly lost as to what to do now and how to go on restoring my contacts. I would very much like to restore the phone as my daughter gave it to me as a christmas present some 2 years ago because she knows i have always liked the good old sony walkmans. I really liked the little slick device and it has served me very well these 2 years. Also, im mostly concerned about my contacts. is there any way in the world, i can get the numbers out of the phone? they are not on the sim card. I feel very very lost and i need the numbers for work. I am a contractor and without these numbers ill lose alot of business that i had to call back or keep in touch with or followup on.

Is there anyway anyone can help me step by step as on to what to exactly do? and perhaps also if there a save for my contacts?

Thank you and merry christmas

[djape48]

This is bacis flashing tutorial for XS++
XS++ 2.x Guide - Top Sony Forums
I'm not sure about that contacts, I think there is no way to save them, but don't trust me on that. I recommend you to go to service, in my country flashing cost 10-15 euro

[simox]

If you are lucky then flashing the MAIN firmware(but ONLY the MAIN) it will bring back your phone to life, and you will be able to save your contact list with MyPhoneExplorer. After you recovered the contact list, you can flash your phone completely: XS++ 3.1 Guide-Flashing, Customizing, Recovering

How to flash the MAIN only: follow the XS++ 3.1 Guide-Flashing, Customizing, Recovering guide BUT in 3) Flashing the firmware, Step 2. select the MAIN firmware only and press the flash button.

If something isn't clear, just ask;)

[avi810]

Happy new year everyone.
I have a big problem with my w810i.
Firstly Its notwork locked. I wanted to remove the lock using a vkp patch in setool2lite.
heres the log...

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906400332471 CERT:RED
FLASH CID:49 COLOR:RED

MAPP CXC article: R4DB005 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4DB005
Language Package:EUROPE_1
CDA article: CDA102494/45
CDA version: R2A
Default article: cxc1250324
Default version: R4DB005

Network LOCKED
Operator: MULTIPLE

USERCODE:224539

Elapsed:6 secs.
Elapsed:6 secs.
Abort all operations.
Can't load id loader !
Elapsed:249 secs.
Elapsed:249 secs.

after
welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35906400332471 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:2019
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
Embedded flashloader:
COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:2019
Flash props sent ok
FOUND: R4DB005_CXC1250316_GENERIC_HN
Restore from:R4DB005_CXC1250316_GENERIC_HN
can't open file "E:\Documents and Settings\Roshan\Desktop\New Folder\rest\R4DB005_CXC1250316_GENERIC_HN"
Starting to process VKP patch script: E:\Documents and Settings\Roshan\Desktop\vkp\W810_R4DB005_remove_si m_locks.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44E40000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:47 secs.

now the trouble starts...
it is not powering on..
XS++ says this
09:38:34| XS++ v3.1 (Darwin) Ready !

09:38:34| Executed on Microsoft Windows XP

09:38:41|

09:38:41| Attempting to open the interface...

09:38:41|

09:38:41| TURN OFF PHONE!

09:38:41| Hold 'C' button on phone and connect phone NOW.

09:38:41| You have 30 seconds...

09:38:41|

09:38:46| Baseband ID: 8040

09:38:46| Protocol Version: 3.1

09:38:46|

09:38:46| Sending db2010_cid00_prodid_p3l.bin...

09:38:46| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

09:38:46| This is a PRODUCTION_ID loader

09:38:46| Activating GDFS...

09:38:46| Cannot open GDFS

09:38:46| Activating GDFS...

09:38:46| Cannot open GDFS

09:38:46| Activating GDFS...

09:38:46| Cannot open GDFS

09:38:46| Activating GDFS...

09:38:46| Cannot open GDFS

09:38:46| Activating GDFS...

09:38:46| Cannot open GDFS

09:38:46| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)

09:38:46| ...using IMEI name

09:38:46|

09:38:46| Profiling SEMC phone...

09:38:46| Platform: DB2010

09:38:46| OTP CID: 49

09:38:46| EROM CID: 49

09:38:46| EROM Color: Red

09:38:46| IMEI: 35906400xxxxxx

09:38:46| Phone ID: W810

09:38:46| Region: n/a

09:38:46| CDA: n/a n/a

09:38:46| Firmware Version: n/a

09:38:46| EROM: n/a

09:38:46| Ready for operation!

09:39:43| Activating GDFS...

09:39:44| Cannot open GDFS

09:39:44| GDFS operation was successful

09:39:46| Disconnected... Unplug the phone

09:40:12| Shutting down...

09:45:25| XS++ v3.1 (Darwin) Ready !

09:45:25| Executed on Microsoft Windows XP

09:45:45| Shutting down...

well i tried to flash the fs, since i read it would help. I used the correct firmware.. Profiling SEMC phone...

12:17:56| Platform: DB2010

12:17:56| OTP CID: 49

12:17:56| EROM CID: 49

12:17:56| EROM Color: Red

12:17:56| IMEI: 35906400xxxxxx

12:17:56| Phone ID: W810

12:17:56| Region: n/a

12:17:56| CDA: n/a n/a

12:17:56| Firmware Version: n/a

12:17:56| EROM: n/a

12:17:56| Ready for operation!

12:18:39| ~~~~~~~~~~ Custpack information ~~~~~~~~~~

12:18:39| Custpack: EUROPE_1 (CDA102494/108) (W810)

12:18:39| Generic(non-branded) custpack: Yes

12:18:39| Allowed languages: en, pt, es, fr,

12:18:39| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

12:18:49|

12:18:49| Sending db2010_cid49red_flash_r2a003.bin...

12:18:49| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

12:18:49| This is a FLASH loader

12:18:49| Now flashing filesystem...

12:18:49| Flashing e:\documents and settings\roshan\desktop\new folder\w810_r4db005_fs_europe_1_red49.fbn

12:18:49| Header type: BABE

12:18:49| 157 flashblocks

12:20:05| Finishing flash

12:20:05| Done flashing
now its still dead and neither xs++ or setool2lite recognises it..
Can any one HELP ME PLEASE!!!!

[philzfog]

pm me ur msn if u in the uki have loads off unlock pcb boards will charge 10 pound plus ur for retune