K800 Dead

[SilentMove]

K800 looks fine, but it cannot be turned on and connected by XS++, Setool, FAR.
With Setool first time was able to connect with 2+5, but i tried one more time, then many times and nothing. Possible to do something?

[SilentMove]

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3517070xxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit

[jasmin]

Tried with a full flash ( main , fs and custom file ).

Have a nice day

[philzfog]

no ack during gdfs_readvar !
Can't read SCR
try a full battry and that phone wont charge that battry

[SilentMove]

I can't do a full flash. What about test points?

[hyperion17]

AFAIK "Can't read SCRC unit" means your GDFS is damaged or corrupted and you must repair it with Setool Box .

[SilentMove]

Can I do testpoint for free? Tell me please, if it's possible to do.

[snowflake]

Hellow guys i also have a similar problem.when i flushed my blinkng k800i which i changed from CID49 to CID52 it stopped the white screen blinkng and now blinks 6times in infrared port! Should i use setool if so how can i run it on my pc? Please help.

[SeaMonkey]

Hellow guys i also have a similar problem.when i flushed my blinkng k800i which i changed from CID49 to CID52 it stopped the white screen blinkng and now blinks 6times in infrared port! Should i use setool if so how can i run it on my pc? Please help.

Read this plz help... k810 is dead what can i do ? - Top Sony Forums

[swindlerz]

silent move any ideas what caused the problem because if phone dropped in water the phone will be broken but you still can connect via 2+5 but its still broken