Well...after spending five days of my holidays trying to fix my phone I have failed miserably! I dont get it. I cant get the right files! I cant operate FAR, SEPF, JD FLASHER I dont understand the concept of how each one is suppose to work and what each thing does. I cant do it without more knowledge if the workings of them and without detailed instruction. It seems there is not enough information anywhere for me to learn how it works. What I do know is when I try to load FS file W600_R7CA017_FS_AMERICA_1_RED49.fbn I get a block error on last block 50010000,00010000. See log below:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit http://www.setool.net and buy FULL.

ChipID:8040,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:890D
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744600583447 CERT:RED
FLASH CID:49 COLOR:RED

Model:W600i
Brand:Cingular Wireless
MAPP CXC article: R7CA017 prgCXC1123106_NAM_2_EE
MAPP CXC version: R7CA017
Language Package:CINGULAR
CDA article: CDA102453/17
CDA version: 022706
Default article: cxc1123107
Default version: R7CA017

Network LOCKED
Operator: MULTIPLE

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:15 secs.
Elapsed:15 secs.
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102453_120905
MODEL:W600i
VARIANT:AMERICA_1
LANGUAGE: EN
LANGUAGE: CF
LANGUAGE: XL

ChipID:8040,EMP protocol:0301

OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744600583447 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"


OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R7CA017_CXC1123106_NAM_1_EE
Restore from:R7CA017_CXC1123106_NAM_1_EE
writing D:\Downloaded Programs\Sony Ericsson\SETOOL2LITE\Firmware\Use these\W600_R7CA017_MAIN_NAM_1_EE_RED49\W600_R7CA01 7_MAIN_NAM_1_EE_RED49.mbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:348
Will flash 348 blocks...
SSW loading returns:0
writing D:\Downloaded Programs\Sony Ericsson\SETOOL2LITE\Firmware\Use these\W600_R7CA017_FS_AMERICA_1_RED49\W600_R7CA017 _FS_AMERICA_1_RED49.fbn
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:261
Will flash 261 blocks...
verify block error
last blk:50010000,00010000
Elapsed:526 secs.

This is all I get. I have tried to use Far, SEFP and JD FLASHER with no luck. I followed every tutorial I can find here in TopSony and other places and have found no good instructions as to what I am doing or need to do. Only bits and pieces here and there. I wish someone could help me Understand all this!! I dont have a concept as to how the flash memory on this phone works. I have read about erom, main, fs, custpack, and seens thousands of files with extensions of .ssw, .hdr, bin, .ldr, .rest etc. I have downloaded about 2gb of sony ericsson files and stuff but most are not W600i related, seems they are omitted for SOME reason. I read I need a file from DenPo but I cant get it. I have tried every link possible to get what I need but cannot. Read everything and still cannot work without files I guess. I tried FAR, SEFP and JD FALSHER but I was only guessing because the tutorial was too general for me. It did not work for me the way it says.
My only hope is for someone who knows how to communicate this to me and tell me how the Flash memory is suppose to work/structured and how the files are installed to it. I have flashed my computers BIOS/ROM for years with beta's and so forth but was never this hard to understand. I know I am a newbie but I am fried to the crisp now and ready for the nut house. My job requires following procedures and I have written procedures myself and this has too many holes in it and blank pages for me. Someone PPPLLLLEAASE help me. I know I may requied extra help and would greatly appreciate it if you could. Hell I'll pay for a collect call at this point.

Gigman!!