z610i phone lock code

[deanouk123]

hi there hope your all ok
ive got my mates z610i and hes forgotten his phone lock code is they any way or any software i can get or any help to get into phone and reset the code ive tryed the default 0000 but no luck and help would be great.....iam a beggner so give full details please.....many thanks for taking time to read this

[addict26]

Reflash it :) be sure to make him save all contacts and user info on the memory card and SIM before flashing!

[deanouk123]

hi and thanks for your reply could you please tell me what software and any other programms i need to install to do this ...i dont have any software disk's just the usb cable...is it possible you could give me a step by step guide???many thanks again look forward for your reply

[HX_unbanne]

The things you should do depends on that - what kind of phone your mate own - is it branded ( Vodafone , Orange, O2, blablabla ) or non-branded ( "Generic" )).
If phone is branded and warranty status does not matter ( its already ended or phone has not got warranty ), then flash with generic firmware.

To do this, you must follow XS++ or SETool2 Lite flashing guide. Everything else should be written there.

P.S. If you still does not understand, where to get required files, you must have posted more than 10 NON-Spam posts and registered for more than 3 days here .. after gaining access to Download section, search for necessary files ;)

If you don't get them, Google is all yours.

P.P.S. Actually I should no have had to write half of this stuff ..., but usually people are too lazy / dumb for some thinking or using logic .. :(

[SeaMonkey]

Read this tutorial XS++ 3.1 Guide-Flashing, Customizing, Recovering - Top Sony Forums and when you sucssesfully connect with XS++ - go to GDFS (down,right - tick GDFS and XS will open new menu and on top you will find PHONE LOCK option - hit and XS would reset or read phone lock

[deanouk123]

hi there
ive got phone connected to xs++ and went to gdfs and it opened a new window with phone lock option i pressed one that but it has still not reset code to 0000...any more help and sorry to be a pain.iam not sure how to do a screen shot or i would show you what iam getting up..

[SeaMonkey]

But you can post log from XS++ here without IMEI number

[deanouk123]

here is a log hope you can now tell me what iam doing wrong and honest i really do thank you for helping me........
19:08:00| XS++ v3.0 beta (Sinyar) Ready !


19:08:00| Executed on Microsoft Windows Vista


19:08:38|


19:08:38| Attempting to open the interface...


19:08:38|


19:08:38| TURN OFF PHONE!


19:08:38| Hold 'C' button on phone and connect phone NOW.


19:08:38| You have 30 seconds...


19:08:38|


19:08:43| Baseband ID: 9900


19:08:43| DB2020


19:08:43| Protocol Version: 3.1


19:08:43| Phone name detected!


19:08:43|


19:08:43| Profiling SEMC phone...


19:08:43| Baseband ID: DB2020


19:08:43| OTP CID: 51


19:08:43| EROM CID: 53


19:08:43| EROM Color: Red


19:08:43| IMEI: 35283701xxxxxx


19:08:43| Phone ID: Z610


19:08:43| Network: HUTCH_1


19:08:43| CDA: CDA102579/3 R15A


19:08:43| Firmware Version: R1KH001


19:08:43| EROM: R3A022


19:08:43| Ready for operation!


19:08:54| Sorry, your phone is NOT SUPPORTED


19:08:54| Sendinging shutdown signal to phone...


19:08:56| Shutting down...


19:09:11| Shutting down...

[SeaMonkey]

You are doing everything wright,but your phone have CID53 and for now XS don't support that CID - and you can't reset phone lock code with any free tool and I really don't know if some payed service,maybe, do it that for free or you will need to pay this

[deanouk123]

never ok thanks for every ones help on here iam gutted now thought i would of been able to get the phone lock code off for my friend...oh well ive been beaten lol