Hello to all, this is my first post here.
I've a W600i showing a strange issue: it can't receive SMS anymore. It continuously shows an error message telling to delete all messages from the phone to make room for other messages, though I did an hard reset and a firmware update through SE support site.
So, I'd like to flash the phone (and debrand it) trying to get rid of this problem.
Here is XS++ output:

Hold 'C' button on phone and connect phone NOW.
17:26:59| You have 30 seconds...
17:26:59|
17:27:04| Baseband ID: 8040
17:27:04| Protocol Version: 3.1
17:27:04|
17:27:04| Sending db2010_cid00_prodid_p3l.bin...
17:27:04| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:27:04| This is a PRODUCTION_ID loader
17:27:04| Activating GDFS...
17:27:04| Phone name detected!
17:27:04|
17:27:04| Profiling SEMC phone...
17:27:05| Platform: DB2010
17:27:05| OTP CID: 49
17:27:05| EROM CID: 49
17:27:05| EROM Color: Red
17:27:05| IMEI: xxxxxxxxxxxxxx
17:27:05| Phone ID: W600
17:27:05| Region: TIM_ITALY
17:27:05| CDA: PCR-ID: 31673 RA13
17:27:05| Firmware Version: R7CA017
17:27:05| EROM: n/a
17:27:05| Ready for operation!
17:27:23| After making any changes with FSX
17:27:23| you must press the 'Shutdown' button
17:27:58| Sendinging shutdown signal to phone...
17:27:58| Done.. You may now connect again...
17:27:58| Shutting down...
14:26:49| XS++ v3.1 (Darwin) Ready !

Is there an euro debranded firmware for w600i with a IT pack??

Thanks
Cap.