no i mean my phone cannot charge bateery...cannot conect to pc cannot conect to xs++,farmanger,and my phone cannot open....
no i mean my phone cannot connect to pc....cannot charge...cannot open the phone...this is the log before i flash brown to red....16:44:43| XS++ v3.1 (Darwin) Ready !
16:44:43| Executed on Microsoft Windows XP
16:44:50|
16:44:50| Attempting to open the interface...
16:44:50|
16:44:50| TURN OFF PHONE!
16:44:50| Hold 'C' button on phone and connect phone NOW.
16:44:50| You have 30 seconds...
16:44:50|
16:44:57| Baseband ID: 8040
16:44:57| Protocol Version: 3.1
16:44:57|
16:44:57| Sending db2010_cid00_prodid_p3l.bin...
16:44:57| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
16:44:57| This is a PRODUCTION_ID loader
16:44:57| Activating GDFS...
16:44:57| Phone name detected!
16:44:57| Restarting phone - please wait...
16:44:57|
16:44:57| Disconnect phone from USB-port and wait for
16:44:57| further instructions.
16:44:57| You have 10 seconds.
16:44:57|
16:45:07| Open the battery-cover and reinsert the battery.
16:45:07| Hold C Button on phone and connect phone again.
16:45:07| You have 30 seconds.
16:45:07|
16:45:13| Baseband ID: 8040
16:45:13| Protocol Version: 3.1
16:45:13| Phone has restarted successfully...
16:45:13|
16:45:13| Profiling SEMC phone...
16:45:13| Platform: DB2010
16:45:13| OTP CID: 36
16:45:13| EROM CID: 36
16:45:13| EROM Color: Brown
16:45:13| IMEI: 35682900xxxxxx
16:45:13| Phone ID: W800
16:45:13| Region: APAC_1
16:45:13| CDA: CDA123456/123 R2A
16:45:13| Firmware Version: R1BC002
16:45:13| EROM: n/a
16:45:13| Ready for operation!
16:45:18| After making any changes with FSX
16:45:18| you must press the 'Shutdown' button
16:45:19|
16:45:19| Sending db2010_cid49brown_cs_v23.bin...
16:45:19| Prologue: Failed
16:45:19| Error: FSX failed.
16:45:19| FSX Shutdown!
16:45:21| Disconnected... Unplug the phone
16:45:34|
16:45:34| Attempting to open the interface...
16:45:34|
16:45:34| TURN OFF PHONE!
16:45:34| Hold 'C' button on phone and connect phone NOW.
16:45:34| You have 30 seconds...
16:45:34|
16:45:41| Baseband ID: 8040
16:45:41| Protocol Version: 3.1
16:45:41|
16:45:41| Sending db2010_cid00_prodid_p3l.bin...
16:45:41| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
16:45:41| This is a PRODUCTION_ID loader
16:45:41| Activating GDFS...
16:45:41| Phone name detected!
16:45:41| Restarting phone - please wait...
16:45:41|
16:45:41| Disconnect phone from USB-port and wait for
16:45:41| further instructions.
16:45:41| You have 10 seconds.
16:45:41|
16:45:51| Open the battery-cover and reinsert the battery.
16:45:51| Hold C Button on phone and connect phone again.
16:45:51| You have 30 seconds.
16:45:51|
16:46:24| Restart failed!
16:46:24|
16:46:24| Profiling SEMC phone...
16:46:24| Platform: DB2010
16:46:24| OTP CID: 36
16:46:24| EROM CID: 36
16:46:24| EROM Color: Brown
16:46:24| IMEI: 35682900xxxxxx
16:46:24| Phone ID: W800
16:46:24| Region: APAC_1
16:46:24| CDA: CDA123456/123 R2A
16:46:24| Firmware Version: R1BC002
16:46:24| EROM: n/a
16:46:24| Ready for operation!
16:46:27| Sendinging shutdown signal to phone...
16:46:29| Shutting down...
21:52:25| XS++ v3.1 (Darwin) Ready !
21:52:25| Executed on Microsoft Windows XP
21:52:31|
21:52:31| Attempting to open the interface...
21:52:31|
21:52:31| TURN OFF PHONE!
21:52:31| Hold 'C' button on phone and connect phone NOW.
21:52:31| You have 30 seconds...
21:52:31|
21:53:04| Error: Cannot open phone communication port
21:53:06| Disconnected... Unplug the phone
21:53:13| Shutting down...
Published by vnvnation
Reason: Consecutive messages




