Thanks friends, but I have some doubts:



Senter said:

Must use Setool.

1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main, then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.

Trying to do this:

1. Reinsert battery and do NOT turn on phone!
-> Ok
2. Start Setool and click Identify
-> Ok
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
-> Reinsert the battery ? But is still there, wich is the righ momento to pull off the battery ??? I missed ! I try to do without remove the battery, just the cable.
4. Start XS++ v3.1 and click Connect.
-> Ok
5. Hold "C" button in the meantime put the USB cable.
-> Ok
6. Flash only Main, then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
-> My XS++ don't detect the phone , just show a message: "Can't send 0x05 "


Thanks , my friends. !! I still have some hope, to make my cell workout !!