Eroor using xs++ 3.1

[sambangert]

Hi

Trying to flash a W810i using phone xs++ 3.1, CID50. It detects the phone ok, then when i go to flash this comes up:

20:07:03| Phone name detected!
20:07:03|
20:07:03| Profiling SEMC phone...
20:07:03| Platform: DB2010
20:07:03| OTP CID: 50
20:07:03| EROM CID: 50
20:07:03| EROM Color: Red
20:07:03| IMEI: 35657301xxxxxx
20:07:03| Phone ID: W810
20:07:03| Region: EUROPE_2
20:07:03| CDA: CDA102494/86 R6A
20:07:03| Firmware Version: R4ED001
20:07:03| EROM: n/a
20:07:03| Ready for operation!
20:09:33|
20:09:33| Sending db2010_db2012_cid50red_flash_r1a002.bin...
20:09:33| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
20:09:33| This is a FLASH loader
20:09:33| Now flashing firmware main...
20:09:33| Flashing c:\users\sam\documents\my received files\w810_r4ce012_main_generic_hn_red50.mbn
20:09:33| Header type: BABE
20:09:34| 342 flashblocks
20:09:35| Binary acknowledge failed with: 15
20:09:35| Command: Error 0x15
20:09:35| Failed sending flashblock 1. Returnvalue 0xFFFF250B
20:09:35| Finishing flash

Any ideas?????

[simox]

Most probably the firmware you want to flash is corrupted so you need to download again or use another firmware. But to be sure, first check the MAIN firmware with a program called BabeCheck(search for it) to see if it is corrupted.

[hyperion17]

I think you're trying to flash :
W810_R4CE012_MAIN_GENERIC_HN_red50 and
W810_R4ED001_FS_EUROPE_2_RED50. Those files should be the same version.

[simox]

Those files should be the same version.

Even if the firmwares aren't matching, the flashing should succeed. Most probably it is corrupted...

[Leonheart]

...or is trying to flash with an older firmware! Sometimes this cannot be done...
I had this issue on my K770i, couldn't flash an older firmware. Instead I could flash the same version and newer.

I can see your current firmware is R4ED001 and you're trying to flash R4CE012.

[riders4sia]

use the firmware that simox said. if anything happens, post the log here and we will se what we can do